EUVIMEDEUVIMED entdecken
Crossref

Detection of the stiffness reduction in beams based on dynamic response from a moving load

Seweryn Kokot, Julia Kołodziej

Inżynieria i Budownictwo · 15.05.2026 · LXXXII (3) · 343-348

DOI: 10.5604/01.3001.0055.7423 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Inżynieria i Budownictwo, erschienen am 15.05.2026. Verfasst von Seweryn Kokot und 1 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The paper addresses the problem of stiffness reduction identification in beams based on dynamic response induced by a moving load. The main objective is to evaluate the effectiveness of this approach and to develop an identification procedure using numerical simulations and optimization techniques. The analyses are performed using the finite element method, assuming linear elastic behavior, constant contact between the load and the structure, and no surface irregularities. The dynamic response is represented by acceleration time histories. The inverse problem is formulated through an objective function based on the difference between measured and computed responses. The minimization is carried out using a hybrid optimization approach combining a genetic algorithm with the local Nelder–Mead method. It is shown that this strategy enables effective identification of the global minimum, even for complex objective function shapes. Numerical examples for a simply supported beam confirm the high effectiveness of the proposed method in reconstructing stiffness reduction distributions. The hybrid procedure significantly improves accuracy compared to the genetic algorithm alone, reducing both the weighted average error and the maximum identification error. Repeated simulations demonstrate the robustness and repeatability of the approach. The results indicate that the proposed method enables effective detection of stiffness reduction of beams using a limited number of measurements. Further research is required, particularly regarding the influence of measurement noise, load parameters, and experimental validation.

Zitieren

APA

Kokot, S., & Kołodziej, J. (2026). Detection of the stiffness reduction in beams based on dynamic response from a moving load. Inżynieria i Budownictwo, LXXXII(3), 343-348. https://doi.org/10.5604/01.3001.0055.7423

Vancouver

Kokot S, Kołodziej J. Detection of the stiffness reduction in beams based on dynamic response from a moving load. Inżynieria i Budownictwo. 2026;LXXXII(3):343-348. doi:10.5604/01.3001.0055.7423

BibTeX
@article{Kokot2026,
  author = {Kokot, Seweryn and Kołodziej, Julia},
  title = {Detection of the stiffness reduction in beams based on dynamic response from a moving load},
  journal = {Inżynieria i Budownictwo},
  year = {2026},
  volume = {LXXXII},
  number = {3},
  pages = {343--348},
  doi = {10.5604/01.3001.0055.7423}
}
Kostenlos starten →