Application of the Finite Element Method (FEM) for the design of the 3D printing process using a concrete mix – design and experimental validation
Inżynieria i Budownictwo · 15.05.2026 · LXXXII (3) · 312-318
DOI: 10.5604/01.3001.0055.7418 ↗Kurz gefasst
Fachartikel in der Zeitschrift Inżynieria i Budownictwo, erschienen am 15.05.2026. Verfasst von Beata Niesterowicz und 4 weiteren Autor:innen.
Abstract (Originalsprache)
This paper presents a numerical analysis of the 3D printing process of a cement-based composite using the finite element method. The aim of the study was to develop a model capable of reproducing the behavior of the fresh mixture during the manufacturing process. The analysis included mechanical and rheological properties of the material, such as the modulus of deformation and parameters of the Mohr–Coulomb model. The model was experimentally validated by comparing simulation results with an actual print. The obtained results showed good agreement, with only minor differences observed. The findings confirm that a properly selected material model enables reliable representation of the 3D printing process. The study provides a basis for further research on numerical modeling of additive manufacturing technologies in construction.
Zitieren
APA
Niesterowicz, B., Hoffmann, M., Żarkiewicz, K., Skibicki, S., & Sikora, P. (2026). Application of the Finite Element Method (FEM) for the design of the 3D printing process using a concrete mix – design and experimental validation. Inżynieria i Budownictwo, LXXXII(3), 312-318. https://doi.org/10.5604/01.3001.0055.7418
Vancouver
Niesterowicz B, Hoffmann M, Żarkiewicz K, Skibicki S, Sikora P. Application of the Finite Element Method (FEM) for the design of the 3D printing process using a concrete mix – design and experimental validation. Inżynieria i Budownictwo. 2026;LXXXII(3):312-318. doi:10.5604/01.3001.0055.7418
BibTeX
@article{Niesterowicz2026,
author = {Niesterowicz, Beata and Hoffmann, Marcin and Żarkiewicz, Krzysztof and Skibicki, Szymon and Sikora, Pawel},
title = {Application of the Finite Element Method (FEM) for the design of the 3D printing process using a concrete mix – design and experimental validation},
journal = {Inżynieria i Budownictwo},
year = {2026},
volume = {LXXXII},
number = {3},
pages = {312--318},
doi = {10.5604/01.3001.0055.7418}
}
EUVIMED