Designing in a CAD environment
Journal of Engineering 360 · 18.03.2026 · 1 (1/26) · 15-21
DOI: 10.5604/01.3001.0055.7251 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Engineering 360, erschienen am 18.03.2026. Verfasst von Michał Machnik und 2 weiteren Autor:innen.
Abstract (Originalsprache)
This is a design study by students at Jan Dlugosz University in Czestochowa. The aim was to design and perform a numerical analysis of a threshold-angle bracket. Nine variants differing in geometry and material were analysed, while meeting the assumptions regarding maximum weight and strength. The bracket model was designed and analysed using SolidWorks 2020 software. This research will serve as a starting point for future development of the bracket by a manufacturer operating in the technical rescue sector.The dynamic development of Industry 4.0 and competition in global markets have necessitated the introduction of various improvements and optimizations to the production process, aimed at improving quality while simultaneously reducing production costs. One of the industries that require high quality is the automotive industry. At the same time, intense competition for components produced in the Asian market forces European manufacturers to maintain low prices for their products. Meeting these trends in the current economic climate requires a rapid response to changes and the implementation of optimization of technological processes. The design of new components and subassemblies stems from the need for evolving trends and new technical solutions. Contemporary trends are aimed at miniaturization and increased reliability of devices, which determines the use of innovative work methods in the construction and prototyping of new solutions [1]. For everyday devices to meet the requirements of usability, quality, and ergonomics, it is necessary to improve tools that facilitate the work of designers. Design offices are replacing traditional design methods, performed at drawing boards, with advanced computer software. This improves the quality of the design process and shortens the time required to implement new projects [1]. A significant factor in the use of computer-aided design systems is the reduction of production costs, including the optimization of information flow within design companies. Examples of design systems include CAD (Computer Aided Design) and CAE (Computer Aided Engineering) programs. CAD computer programs were developed to replace traditional drafting techniques [2]. Previously, designs created using traditional techniques required engineers to be precise with a pencil and patient when making changes and corrections to the design. Implementing modern design tools in industry is a process that requires effective education for engineering staff. Providing appropriate academic guidance to future engineers at the university level is crucial. The contemporary design and production process extensively utilizes computer-aided software. The development of technical documentation plays a leading role in design work. The introduction of CAD (Computer Aided Design) programs marked a breakthrough in design work. Classic 2D documentation requires a developed spatial imagination from both the designer and the contractor. Initially, CAD programs were used as an electronic drawing board, allowing only the creation of traditional drawing documentation. The breakthrough came with the development of CAD programs into three-dimensional form [3]. This enabled the implementation of design tasks by creating three-dimensional models of constructed elements and mechanisms, visualizing them during the design phase, and tracking their geometric relationships, as well as the ability to conduct motion simulations with collision detection. 3D modeling enables error elimination in the initial design phase and allows for modifications to the 3D model [4]. Along with the development of CAD programs, CAM (Computer Aided Manufacturing) programs for computer-aided manufacturing have developed dynamically. CAM programs are based on a solid model of the manufactured elements, necessary for designing the tool path for numerically controlled machines and devices. 3D models have become standard in both the design and manufacturing processes (CAD/CAM). Special tools supporting the designer's work also rely on 3D models, such as CAE (Computer Aided Engineering) programs for strength and kinematic analyses, and virtual simulations of designed products. The contemporary design process is illustrated in Figure 1.
Zitieren
APA
Machnik, M., Stradomski, T., & Dembiczak, T. (2026). Designing in a CAD environment. Journal of Engineering 360, 1(1/26), 15-21. https://doi.org/10.5604/01.3001.0055.7251
Vancouver
Machnik M, Stradomski T, Dembiczak T. Designing in a CAD environment. Journal of Engineering 360. 2026;1(1/26):15-21. doi:10.5604/01.3001.0055.7251
BibTeX
@article{Machnik2026,
author = {Machnik, Michał and Stradomski, Tomasz and Dembiczak, Tomasz},
title = {Designing in a CAD environment},
journal = {Journal of Engineering 360},
year = {2026},
volume = {1},
number = {1/26},
pages = {15--21},
doi = {10.5604/01.3001.0055.7251}
}
EUVIMED