EUVIMEDEUVIMED entdecken
Crossref

Analysis of the behaviour of timber screw joints subjected to shear at failure depending on the loading angle

Kamil Pawlik, Andrzej Kucharczyk, Rafał Konsola, Julia Kołodziej

Inżynieria i Budownictwo · 30.04.2026 · LXXXII (2) · 218-225

DOI: 10.5604/01.3001.0055.7213 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Inżynieria i Budownictwo, erschienen am 30.04.2026. Verfasst von Kamil Pawlik und 3 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this paper, the influence of timber fibre orientation on the behaviour of timber-to-timber screw connections subjected to shear loading is analysed, with particular emphasis on the load range exceeding the design resistance determined according to Eurocode 5. In the current design procedures, the effect of fibre direction on the load-bearing capacity of screw connections is not explicitly considered, in contrast to bolted connections, which constituted the motivation for the present study.



       Experimental investigations were carried out on specimens made of glued laminated timber of strength class C24 using push-out shear tests. Two fibre orientation configurations relative to the loading direction were analysed: parallel and perpendicular. Based on the recorded load–displacement relationships and the observed failure mechanisms, the influence of fibre orientation on the load-bearing capacity, stiffness, and further load transfer behaviour of the connections was evaluated.



       The results indicate that up to the design load level, the behaviour of the connections is similar regardless of fibre orientation, which supports the simplifications adopted in Eurocode 5. However, beyond this load level, significant differences in stiffness and ultimate load-bearing capacity were observed, resulting from the anisotropic nature of timber and its different embedment strength parallel and perpendicular to the fibres. The conducted analyses demonstrate that consideration of timber fibre orientation is essential for an accurate description of the advanced load transfer behaviour and reserve capacity of screw connections.

Zitieren

APA

Pawlik, K., Kucharczyk, A., Konsola, R., & Kołodziej, J. (2026). Analysis of the behaviour of timber screw joints subjected to shear at failure depending on the loading angle. Inżynieria i Budownictwo, LXXXII(2), 218-225. https://doi.org/10.5604/01.3001.0055.7213

Vancouver

Pawlik K, Kucharczyk A, Konsola R, Kołodziej J. Analysis of the behaviour of timber screw joints subjected to shear at failure depending on the loading angle. Inżynieria i Budownictwo. 2026;LXXXII(2):218-225. doi:10.5604/01.3001.0055.7213

BibTeX
@article{Pawlik2026,
  author = {Pawlik, Kamil and Kucharczyk, Andrzej and Konsola, Rafał and Kołodziej, Julia},
  title = {Analysis of the behaviour of timber screw joints subjected to shear at failure depending on the loading angle},
  journal = {Inżynieria i Budownictwo},
  year = {2026},
  volume = {LXXXII},
  number = {2},
  pages = {218--225},
  doi = {10.5604/01.3001.0055.7213}
}
Kostenlos starten →