EUVIMEDEUVIMED entdecken
Crossref

Grass chopper machine redesign for reducing assembly cost and easier service using integration between design for assembly and design for serviceability

R. Ginting, A.G.A. Harahap, A. Ishak

Journal of Achievements in Materials and Manufacturing Engineering · 01.09.2025

DOI: 10.5604/01.3001.0055.6720 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Achievements in Materials and Manufacturing Engineering, erschienen am 01.09.2025. Verfasst von R. Ginting und 2 weiteren Autor:innen. Die Arbeit nennt 30 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The objective of the paper is to obtain an improved design for the grass chopper machine with the integration of the design for assembly and design for serviceability methods to facilitate assembly and maintenance activities on the grass chopper machine. The integration is carried out to cover the weaknesses of each method by solving problems on the grass chopper machine.The integration between Design for Assembly (DFA) and Design for Serviceability (DFS) can be applied to redesign the product. The integration concept is implemented by inserting the steps from DFS between the stages of DFA into two parts of the stage. A questionnaire is used to examine the actual design and the phenomenon observed with the grass chopper machine, especially regarding its assembly and serviceability.The paper attempts to improve the design of the grass chopper machine based on problems identified from the questionnaire, aiming to reduce assembly costs and make service for the product easier.The efficiency of the grass chopper product can increase by reducing the number of components from 6 to 0, eliminating the need for bolts. In a case study on the redesign of a grass chopper machine, it was found out that design efficiency increased by 7.88%, assembly time decreased by 52.41 minutes, and cost decreased by Rp16,857.1. In terms of serviceability, the casing component on the grass chopper machine will be easier to open and provide access to the internal parts of the grass chopper machine.The actual design of the grass chopper machine is based on problems and complaints from the livestock farm that used the original design, which were then analysed using the DFA and DFS methods. Improving the grass chopper machine by reducing the number of bolts required to assemble casing parts makes it easier to assemble and service.

Zitieren

APA

Ginting, R., Harahap, A., & Ishak, A. (2025). Grass chopper machine redesign for reducing assembly cost and easier service using integration between design for assembly and design for serviceability. Journal of Achievements in Materials and Manufacturing Engineering. https://doi.org/10.5604/01.3001.0055.6720

Vancouver

Ginting R, Harahap A, Ishak A. Grass chopper machine redesign for reducing assembly cost and easier service using integration between design for assembly and design for serviceability. Journal of Achievements in Materials and Manufacturing Engineering. 2025. doi:10.5604/01.3001.0055.6720

BibTeX
@article{Ginting2025,
  author = {Ginting, R. and Harahap, A.G.A. and Ishak, A.},
  title = {Grass chopper machine redesign for reducing assembly cost and easier service using integration between design for assembly and design for serviceability},
  journal = {Journal of Achievements in Materials and Manufacturing Engineering},
  year = {2025},
  doi = {10.5604/01.3001.0055.6720}
}
Kostenlos starten →