EUVIMEDEUVIMED entdecken
Crossref

Anchorage length of reinforcing bars according to PN-EN 1992-1-1:2008 and PN-EN 1992-1-1:2024-05. Code requirements and calculation examples

Michał Głowacki, Wojciech Kazek

Inżynieria i Budownictwo · 28.02.2026 · LXXXII (1) · 104-109

DOI: 10.5604/01.3001.0055.6380 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Inżynieria i Budownictwo, erschienen am 28.02.2026. Verfasst von Michał Głowacki und 1 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The aim of this paper is to compare the results of calculations of the anchorage length of reinforcing bars in concrete according to Eurocode PN-EN 1992-1-1:2008 with the results obtained in accordance with Eurocode PN-EN 1992-1-1:2024-05. The results of anchorage length calculations are presented for tensioned and compressed reinforcing bars of various diameters and for different concrete strength classes, under good or poor bond conditions. In general, it can be concluded that for straight reinforcing bars the design anchorage length according to PN-EN 1992-1-1:2008 is greater than or equal to the design anchorage length according to PN-EN 1992-1-1:2024-05. In contrast, for hooked reinforcing bars the design anchorage length according to PN-EN 1992-1-1:2008 is less than or equal to the design anchorage length according to PN-EN 1992-1-1:2024-05.

Zitieren

APA

Głowacki, M., & Kazek, W. (2026). Anchorage length of reinforcing bars according to PN-EN 1992-1-1:2008 and PN-EN 1992-1-1:2024-05. Code requirements and calculation examples. Inżynieria i Budownictwo, LXXXII(1), 104-109. https://doi.org/10.5604/01.3001.0055.6380

Vancouver

Głowacki M, Kazek W. Anchorage length of reinforcing bars according to PN-EN 1992-1-1:2008 and PN-EN 1992-1-1:2024-05. Code requirements and calculation examples. Inżynieria i Budownictwo. 2026;LXXXII(1):104-109. doi:10.5604/01.3001.0055.6380

BibTeX
@article{Gowacki2026,
  author = {Głowacki, Michał and Kazek, Wojciech},
  title = {Anchorage length of reinforcing bars according to PN-EN 1992-1-1:2008 and PN-EN 1992-1-1:2024-05. Code requirements and calculation examples},
  journal = {Inżynieria i Budownictwo},
  year = {2026},
  volume = {LXXXII},
  number = {1},
  pages = {104--109},
  doi = {10.5604/01.3001.0055.6380}
}
Kostenlos starten →