Enhancement of product quality during the metal forming process through optimal design and finite element analysis
Journal of Achievements in Materials and Manufacturing Engineering · 01.09.2025
DOI: 10.5604/01.3001.0055.6367 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Achievements in Materials and Manufacturing Engineering, erschienen am 01.09.2025. Verfasst von B. Kamoon und 2 weiteren Autor:innen. Die Arbeit nennt 11 Literaturangaben.
Abstract (Originalsprache)
The aims of the research are to use the finite element method to predict the behaviour of the whole structure of the model for each stage of the forming process computationally, and then to improve efficiency and reduce the need for trial-and-error methods.The main approach of the study is to use the commercial finite element software ABAQUS to model a key model and investigate the key parameters of the forming process in the manufacturing process of the industrial part. It involves modelling the forming process, performing FEA simulations to predict stresses, and improving the design of products or tools by adjusting parameters such as geometry or process conditions to minimise defects and optimise quality. The approach reduces errors, saving time and costs while leading to better-quality products.Sheet-metal simulation was carried out. The results showed that the interface between the tool parts and the forming metal must be controlled to obtain a good product. The rebound behaviour of the forming metal after the external force is removed can determine the response during this process. A reasonable initial billet dimension can reduce raw material costs and enhance the product's mechanical properties. The simulation results revealed that uniform pressure during forming would reduce friction and stress generation (4%), which would improve product quality.Some limitations in the research process have been identified. Due to increasing demand for high-precision, high-quality products in recent years, high-technology equipment and feeding systems are required. However, the cold-forming design process is currently experienced-based and highly empirical.In recent years, there has been a significant increase in the need for more efficient production methods than those currently in use. Cold forming has emerged as a potential solution due to its ability to produce parts with good surface finish and mechanical properties. However, the cold-forming design process is currently experience-based and highly empirical. Cold forming has emerged as a potential solution due to its ability to produce a product with good mechanical properties and a better surface finish.The originality and value of the paper lie in the comparison between recent data and numerical results, which confirm the potential of this methodology for predicting the behaviour of the metal during forming processes, and it aligns well with recent research in similar fields.
Zitieren
APA
Kamoon, B., Jabbar, W., & Mahmood, R. (2025). Enhancement of product quality during the metal forming process through optimal design and finite element analysis. Journal of Achievements in Materials and Manufacturing Engineering. https://doi.org/10.5604/01.3001.0055.6367
Vancouver
Kamoon B, Jabbar W, Mahmood R. Enhancement of product quality during the metal forming process through optimal design and finite element analysis. Journal of Achievements in Materials and Manufacturing Engineering. 2025. doi:10.5604/01.3001.0055.6367
BibTeX
@article{Kamoon2025,
author = {Kamoon, B. and Jabbar, W. and Mahmood, R.A.},
title = {Enhancement of product quality during the metal forming process through optimal design and finite element analysis},
journal = {Journal of Achievements in Materials and Manufacturing Engineering},
year = {2025},
doi = {10.5604/01.3001.0055.6367}
}
EUVIMED