EUVIMEDEUVIMED entdecken
Crossref

Analysis of material applicability for pneumatic conveying pipelines of household waste based on CFD-DEM

Keqi Huang, Yufeng Zhao, Mingming Lyu, Xiaomin Liu, Junlong Zhou, Linghu Yan, Zetian Ren

Advances in Engineering Technology Research · 10.07.2026 · 17 (1) · 504

DOI: 10.56028/aetr.17.1.504.2026 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advances in Engineering Technology Research, online erschienen am 10.07.2026. Verfasst von Keqi Huang und 6 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Pipeline wear is a critical factor limiting the operational reliability and service life of waste pneumatic conveying pipelines. Compared with the widely used conventional carbon steel (e.g., Q235), wear-resistant polymeric materials offer superior hardness and enhanced corrosion resistance, making them a better choice for pipe materials. To quantify the feasibility of wear-resistant polymeric materials for pneumatic conveyance, this study integrates CFD-DEM simulation with Taber abrasion testing to enable comparative wear-life prediction and cost-per-meter analysis for Q235 and four wear-resistant polymeric materials: polyamide 66 (PA66), polyetheretherketone (PEEK), polyetherimide (PEI), and polyketone (POK). The results indicate that PEEK exhibits a 48.01% improvement in wear resistance compared to Q235 steel, accompanied by an 188.68% increase in cost per linear meter; in contrast, PA66 achieves a 26.88% improvement in wear resistance at a more moderate cost premium of 37.74% per linear meter. PEI and POK exhibit inferior wear resistance relative to Q235 steel and are therefore deemed unsuitable for waste pneumatic conveying pipelines.

Zitieren

APA

Huang, K., Zhao, Y., Lyu, M., Liu, X., Zhou, J., Yan, L., & Ren, Z. (2026). Analysis of material applicability for pneumatic conveying pipelines of household waste based on CFD-DEM. Advances in Engineering Technology Research, 17(1), 504. https://doi.org/10.56028/aetr.17.1.504.2026

Vancouver

Huang K, Zhao Y, Lyu M, Liu X, Zhou J, Yan L, et al. Analysis of material applicability for pneumatic conveying pipelines of household waste based on CFD-DEM. Advances in Engineering Technology Research. 2026;17(1):504. doi:10.56028/aetr.17.1.504.2026

BibTeX
@article{Huang2026,
  author = {Huang, Keqi and Zhao, Yufeng and Lyu, Mingming and Liu, Xiaomin and Zhou, Junlong and Yan, Linghu and Ren, Zetian},
  title = {Analysis of material applicability for pneumatic conveying pipelines of household waste based on CFD-DEM},
  journal = {Advances in Engineering Technology Research},
  year = {2026},
  volume = {17},
  number = {1},
  pages = {504},
  doi = {10.56028/aetr.17.1.504.2026}
}
Kostenlos starten →