Finite Element Simulation of Residual Stresses in Welded Joints Between G20Mn5N Cast Steel and Q355NHC Weathering Steel
Advances in Engineering Technology Research · 08.07.2026 · 17 (1) · 405
DOI: 10.56028/aetr.17.1.405.2026 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advances in Engineering Technology Research, online erschienen am 08.07.2026. Verfasst von Sen Lin und 2 weiteren Autor:innen.
Abstract (Originalsprache)
To investigate the residual stress distribution patterns in dissimilar steel welded joints between G20Mn5N cast steel and Q355NHC weathering steel, this study employed a “thermal-metallurgical-mechanical” coupled finite element method. Using the large-scale finite element software SYSWELD as a platform, a computational model of a multi-layer, multi-pass butt joint was established. Material thermodynamic parameters were calculated using the CALPHAD method. Combined with the Goldak double-ellipsoidal heat source model, a linear heat input scheme was established to achieve coupled calculations of the temperature field, metallurgical field, and stress field. The accuracy of the model was verified through blind hole tests. Based on this, the mechanism by which solid-state phase transformations influence residual stress distribution was thoroughly analyzed. The results indicate that ferrite, bainite, and martensite in the welded joint exhibit distinct spatial gradient distributions. Longitudinal residual stresses follow a “high at the center, low at both ends” distribution, with a peak of approximately 557 MPa; transverse residual stresses show a “decreasing from the center toward both ends” trend, with a peak of approximately 220 MPa. Due to differences in the mechanical properties of the dissimilar steels, the longitudinal residual stress in the heat-affected zone on the Q355NHC weathering steel side was generally higher than that on the G20Mn5N cast steel side. The study also revealed the mechanism by which differences in the properties of dissimilar materials lead to asymmetric stress distribution, providing a theoretical basis for process optimization of such joints.
Zitieren
APA
Lin, S., Wang, P., & Qian, H. (2026). Finite Element Simulation of Residual Stresses in Welded Joints Between G20Mn5N Cast Steel and Q355NHC Weathering Steel. Advances in Engineering Technology Research, 17(1), 405. https://doi.org/10.56028/aetr.17.1.405.2026
Vancouver
Lin S, Wang P, Qian H. Finite Element Simulation of Residual Stresses in Welded Joints Between G20Mn5N Cast Steel and Q355NHC Weathering Steel. Advances in Engineering Technology Research. 2026;17(1):405. doi:10.56028/aetr.17.1.405.2026
BibTeX
@article{Lin2026,
author = {Lin, Sen and Wang, Ping and Qian, Hongliang},
title = {Finite Element Simulation of Residual Stresses in Welded Joints Between G20Mn5N Cast Steel and Q355NHC Weathering Steel},
journal = {Advances in Engineering Technology Research},
year = {2026},
volume = {17},
number = {1},
pages = {405},
doi = {10.56028/aetr.17.1.405.2026}
}
EUVIMED