Optimization Design and Analysis of an Irregular Bracket for a Spacecraft Device in Orbital Environment
Advances in Engineering Technology Research · 07.07.2026 · 17 (1) · 200
DOI: 10.56028/aetr.17.1.200.2026 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advances in Engineering Technology Research, online erschienen am 07.07.2026. Verfasst von Cunyi Wang und 6 weiteren Autor:innen.
Abstract (Originalsprache)
Aiming at the lightweight and high-stiffness requirements of a certain type of bracket with a plate-like structure, combined with the special working performance and environment of the bracket, topology optimization technology is introduced into the optimal design of the bracket structure in the aerospace field. Taking stiffness as the objective function and mass as the constraint condition, topology optimization and design are carried out for the bracket. The "spatial encircling configuration" design is proposed, and simulation check and experimental verification are conducted. Firstly, analysis and research are carried out on the bracket under different load conditions. Secondly, an initial model is established based on the relative position relationship between the bracket and the mounting surface of the load equipment. Finally, a bracket structure design method combining topology optimization under multiple load conditions and size optimization considering strength influence is established. The mass of the optimized model is reduced by 63% compared with the initial model. Through the stiffness and strength check of the optimized bracket structure under multiple load conditions, the fundamental frequency is 2.05 times the index requirement. Under acceleration load conditions, the maximum response stress is lower than the yield limit of the material used, meeting the strength requirements. Finally, vibration tests are carried out on the bracket. After the test, the interface position accuracy of the bracket meets the index requirements. It can be concluded that the bracket has high structural stability, meeting the high-performance index requirements of the load equipment. This verifies the feasibility of the topology optimization method and provides an effective method for lightweight and high-stiffness structural design.
Zitieren
APA
Wang, C., Wang, S., Pan, J., Mu, C., Wang, D., Li, D., & Fu, Y. (2026). Optimization Design and Analysis of an Irregular Bracket for a Spacecraft Device in Orbital Environment. Advances in Engineering Technology Research, 17(1), 200. https://doi.org/10.56028/aetr.17.1.200.2026
Vancouver
Wang C, Wang S, Pan J, Mu C, Wang D, Li D, et al. Optimization Design and Analysis of an Irregular Bracket for a Spacecraft Device in Orbital Environment. Advances in Engineering Technology Research. 2026;17(1):200. doi:10.56028/aetr.17.1.200.2026
BibTeX
@article{Wang2026,
author = {Wang, Cunyi and Wang, Shaohua and Pan, Jinqi and Mu, Cheng and Wang, Dapeng and Li, Dongdong and Fu, Yutong},
title = {Optimization Design and Analysis of an Irregular Bracket for a Spacecraft Device in Orbital Environment},
journal = {Advances in Engineering Technology Research},
year = {2026},
volume = {17},
number = {1},
pages = {200},
doi = {10.56028/aetr.17.1.200.2026}
}
EUVIMED