EUVIMEDEUVIMED entdecken
Crossref

Manufacturing of a demonstrator using WAAM technology on the Addilan V0.1 machine.

Jose Antonio Joubert, Enrique Odriozola, Iñigo Tercero

Applied Research Results in Vocational Education & Training · 2023

DOI: 10.56007/arrivet.v1i1.16 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Research Results in Vocational Education & Training, 2023. Verfasst von Jose Antonio Joubert und 2 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Manufacture of a medium-sized demonstrator of the aerospace industry based on WAAM, identifying the key aspects to be considered in the manufacture of this type of parts. One of the project lines of TKNIKA's area of specialization in Additive Metal Manufacturing is related to the WAAM (''Wire and Arc Additive Manufacturing'') technology. This process is classified into the Directed Energy Deposition (DED) family process and as his description says is based on the deposition of a wire melted under the action of an electric arc . The main objective is the generation of knowledge through practice and experimentation in a network between different VET teachers and schools. A medium-sized part has been selected, with a simple geometry, which would normally be manufactured from a metal block or a forged preform. In this case, an arc-wire manufacturing process can be a very interesting alternative. The main objective of this practice is to produce a quality preform, identifying the key aspects that allow it to be manufactured, in a controlled manner, on the Addilan WAAM V0.1 manufacturing machine. The solution has been consisted on manufacturing three-piece series based on previous experiences. Image 3: Result as Machined VS as WAAMed

Zitieren

APA

Joubert, J. A., Odriozola, E., & Tercero, I. (2023). Manufacturing of a demonstrator using WAAM technology on the Addilan V0.1 machine. Applied Research Results in Vocational Education & Training. https://doi.org/10.56007/arrivet.v1i1.16

Vancouver

Joubert JA, Odriozola E, Tercero I. Manufacturing of a demonstrator using WAAM technology on the Addilan V0.1 machine. Applied Research Results in Vocational Education & Training. 2023. doi:10.56007/arrivet.v1i1.16

BibTeX
@article{Joubert2023,
  author = {Joubert, Jose Antonio and Odriozola, Enrique and Tercero, Iñigo},
  title = {Manufacturing of a demonstrator using WAAM technology on the Addilan V0.1 machine},
  journal = {Applied Research Results in Vocational Education & Training},
  year = {2023},
  doi = {10.56007/arrivet.v1i1.16}
}
Kostenlos starten →