EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Synthesis and characterization of an inorganic-organic nanomaterial for use as corrosion inhibitor for mild steel in HCl

Msenhemba Moses Mchihi, Isioma Scholastic Odiachi, Adeola Praise Adeoti, Williams Jesse Adamu, Audu Ogbe Daniel

Journal of Electrochemical Science and Engineering · 30.06.2026 · 16

DOI: 10.5599/jese.3441 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Electrochemical Science and Engineering, online erschienen am 30.06.2026. Verfasst von Msenhemba Moses Mchihi und 4 weiteren Autor:innen. Die Arbeit nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The study of corrosion inhibitors for mild steel in HCl is crucial for enhancing the service life of industrial infrastructure, especially in environments prone to rapid deterioration and high maintenance costs. In this work, a zinc acetate-omeprazole nanomaterial (ZO) was prepared and its corrosion inhibition performance on mild steel deterioration in 0.5 M HCl solution was investigated using electrochemical techniques. The particles of the nano­material (with sizes ranging from 2.70 to 6.37 nm) predominantly exhibited a spherical to near-spherical morphology, with relatively smooth, well-defined edges. The mean hydrodynamic diameter of particles (Z-average diameter) of 59.79 nm indicates that the particles are primarily in the nanoscale range. The X-ray diffraction pattern of ZO revealed distinct diffraction peaks superimposed on a broad background, indicating the coexistence of crystalline and amorphous phases. A decrease in corrosion current density from 1781 µA cm-2 in the uninhibited medium to 1315 µA cm-2 upon the introduction of 0.1 g L-1 of ZO was observed. A progressive decline in corrosion current density was observed as inhibitor concentration increased. The shifts in corrosion potential were relatively small, suggesting that the inhibitor exhibits a mixed-type inhibition mechanism rather than a purely anodic or cathodic one. The charge transfer resistance increased from 210.21 Ω cm² in the absence of ZO to 230 Ω cm² in its presence (0.1 g L-1). The electrochemical impedance spectroscopy results indicated that the highest inhibition efficiency achieved in this study was 77.6 % at 0.4 g L-1 ZO concentration. The inhibition efficiency increased with increasing inhibitor concentration. These findings indicate that the synthesized nanomaterial effectively mitigates corrosion of mild steel in 0.5 M HCl solution.

Zitieren

APA

Mchihi, M. M., Odiachi, I. S., Adeoti, A. P., Adamu, W. J., & Daniel, A. O. (2026). Synthesis and characterization of an inorganic-organic nanomaterial for use as corrosion inhibitor for mild steel in HCl. Journal of Electrochemical Science and Engineering, 16. https://doi.org/10.5599/jese.3441

Vancouver

Mchihi MM, Odiachi IS, Adeoti AP, Adamu WJ, Daniel AO. Synthesis and characterization of an inorganic-organic nanomaterial for use as corrosion inhibitor for mild steel in HCl. Journal of Electrochemical Science and Engineering. 2026;16. doi:10.5599/jese.3441

BibTeX
@article{Mchihi2026,
  author = {Mchihi, Msenhemba Moses and Odiachi, Isioma Scholastic and Adeoti, Adeola Praise and Adamu, Williams Jesse and Daniel, Audu Ogbe},
  title = {Synthesis and characterization of an inorganic-organic nanomaterial for use as corrosion inhibitor for mild steel in HCl},
  journal = {Journal of Electrochemical Science and Engineering},
  year = {2026},
  volume = {16},
  doi = {10.5599/jese.3441}
}
Kostenlos starten →