EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Synergistic heterogeneous electro-Fenton process using iron-loaded bentonite for binary dyes degradation from wastewater

Hind H. Thwaini, Zahraa M. Hameed, Rasha H. Salman

Journal of Electrochemical Science and Engineering · 21.05.2026 · 16

DOI: 10.5599/jese.3240 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Electrochemical Science and Engineering, online erschienen am 21.05.2026. Verfasst von Hind H. Thwaini und 2 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study examines the impact of operational parameters on the performance of a heterogeneous electro-Fenton process for removing a binary mixture of malachite green (MG) and methylene blue (MB) using iron-loaded bentonite clay (Fe-Bent.) particles as a heterogeneous catalyst. The effects of current density (j), Fe-Bent.* dosage (Bent. quantity variable) and Fe*-Bent. dosage (iron concentration variable), were investigated. Brunauer-Emmett-Teller analysis, X-ray diffraction, X-ray fluorescence and scanning electron microscopy were used to extensively evaluate the synthesized catalyst, confirm­ing the effective incorporation and uniform distribution of iron within the bentonite clay. The results showed that increase of j enhanced dye removal efficiency to over 95 % for MG and 90 % for MB at 20 mA cm-². Furthermore, increasing the dose of Fe-Bent.* from 1 to 3 g improved the overall removal efficiency, although this was accompanied by a decrease in adsorption capacity and a deviation from ideal kinetic behaviour at higher loadings. Fe*-Bent. dosage with a variable iron concentration from (0.1 to 0.2 mM) exhibited the highest removal efficiency, while increasing to 0.3 mM resulted in decreased process performance. The comparison results showed that the electro-Fenton process alone achieved limited removal, whereas bentonite adsorption alone provided high but incomplete removal. In contrast, the heterogeneous electro-Fenton process achieved the highest efficiency (98.06 % for MG and 91.14 % for MB, with COD values of 84.53 % for MG and 79.82 % for MB), with the lowest iron leaching (

Zitieren

APA

Thwaini, H. H., Hameed, Z. M., & Salman, R. H. (2026). Synergistic heterogeneous electro-Fenton process using iron-loaded bentonite for binary dyes degradation from wastewater. Journal of Electrochemical Science and Engineering, 16. https://doi.org/10.5599/jese.3240

Vancouver

Thwaini HH, Hameed ZM, Salman RH. Synergistic heterogeneous electro-Fenton process using iron-loaded bentonite for binary dyes degradation from wastewater. Journal of Electrochemical Science and Engineering. 2026;16. doi:10.5599/jese.3240

BibTeX
@article{Thwaini2026,
  author = {Thwaini, Hind H. and Hameed, Zahraa M. and Salman, Rasha H.},
  title = {Synergistic heterogeneous electro-Fenton process using iron-loaded bentonite for binary dyes degradation from wastewater},
  journal = {Journal of Electrochemical Science and Engineering},
  year = {2026},
  volume = {16},
  doi = {10.5599/jese.3240}
}
Kostenlos starten →