Photocatalytic, electrochemical and photoelectrocatalytic degradation of the reactive dye Turquoise Tiafix R2G using LaFeO3 perovskite
Journal of Electrochemical Science and Engineering · 12.05.2026 · 16
DOI: 10.5599/jese.3177 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Electrochemical Science and Engineering, online erschienen am 12.05.2026. Verfasst von Jonh Yago Erikson Santos und 5 weiteren Autor:innen. Die Arbeit nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Coordenação de Aperfeiçoamento de Pessoal de Nível Superior, Conselho Nacional de Desenvolvimento Científico e Tecnológico, Fundação de Apoio à Pesquisa e à Inovação Tecnológica do Estado de Sergipe.
Abstract (Originalsprache)
In this study, the photocatalytic, electrochemical and photoelectrocatalytic performance of lanthanum ferrite (LaFeO₃) toward the degradation of the dye Turquoise Tiafix R2G was investigated. LaFeO₃ was synthesized via a sol-gel route and characterized by XRD, N₂ adsorption (BET) and SEM, confirming its perovskite structure. Photolysis experiments indicated that the dye is highly photostable under the irradiation conditions employed. In photocatalysis, different LaFeO₃ loadings (0.1, 0.2 and 0.3 g L⁻¹) were tested under a 100 W halogen lamp, with 0.3 g L⁻¹ providing the highest removal, although the process remained limited by electron-hole recombination. In heterogeneous electro-oxidation with LaFeO₃ in suspension, current densities of 10, 15 and 20 mA cm⁻² were applied; 15 mA cm⁻² afforded the best compromise between activity and stability, significantly increasing the dye oxidation rate. The simultaneous application of irradiation and current in the photoelectrocatalytic process led to the highest efficiency, achieving approximately 95% degradation within 60 min. These results demonstrate a clear synergistic effect between photocatalytic reactive oxygen species generation in the LaFeO₃ suspension and electrochemical oxidant generation at the anode, resulting in a more effective oxidative environment. Thus, the optimized photoelectrocatalytic condition (0.3 g L⁻¹ LaFeO₃ and 15 mA cm⁻²) is a promising strategy for the treatment of effluents containing industrial dyes.
Förderung
- Coordenação de Aperfeiçoamento de Pessoal de Nível Superior
- Conselho Nacional de Desenvolvimento Científico e Tecnológico
- Fundação de Apoio à Pesquisa e à Inovação Tecnológica do Estado de Sergipe
Zitieren
APA
Santos, J. Y. E., Barros, R. E. S., Eguiluz, K. I. B., Pimentel, P. M., Oliveira, R. M. P. B., & Salazar-Banda, G. R. (2026). Photocatalytic, electrochemical and photoelectrocatalytic degradation of the reactive dye Turquoise Tiafix R2G using LaFeO3 perovskite. Journal of Electrochemical Science and Engineering, 16. https://doi.org/10.5599/jese.3177
Vancouver
Santos JYE, Barros RES, Eguiluz KIB, Pimentel PM, Oliveira RMPB, Salazar-Banda GR. Photocatalytic, electrochemical and photoelectrocatalytic degradation of the reactive dye Turquoise Tiafix R2G using LaFeO3 perovskite. Journal of Electrochemical Science and Engineering. 2026;16. doi:10.5599/jese.3177
BibTeX
@article{Santos2026,
author = {Santos, Jonh Yago Erikson and Barros, Rebeca E. S. and Eguiluz, Katlin I. B. and Pimentel, Patrícia M. and Oliveira, Rosane M. P. B. and Salazar-Banda, Giancarlo R.},
title = {Photocatalytic, electrochemical and photoelectrocatalytic degradation of the reactive dye Turquoise Tiafix R2G using LaFeO3 perovskite},
journal = {Journal of Electrochemical Science and Engineering},
year = {2026},
volume = {16},
doi = {10.5599/jese.3177}
}
EUVIMED