EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-SA 4.0

Analysis of Sand Casting Method in Manufacturing Ship Water Jet Propulsion Impeller Based on Software Simulation

Vicky Firmansyah, Jangka Rulianto, Eli Novitasari

WAVE: Jurnal Ilmiah Teknologi Maritim · 06.06.2026 · 20 (1) · 56-67

DOI: 10.55981/wave.2026.12923 ↗

Kurz gefasst

Fachartikel in der Zeitschrift WAVE: Jurnal Ilmiah Teknologi Maritim, online erschienen am 06.06.2026. Verfasst von Vicky Firmansyah und 2 weiteren Autor:innen. Die Arbeit nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This research aims to analyze the casting process of an impeller used in a marine water jet propulsion system using the sand casting method, assisted by ProCAST simulation software. Two gating system designs were compared: one without a riser and one with a riser, along with three pouring temperature variations (630°C, 660°C, and 680°C) to identify casting defects. Simulation results show that the design with a riser produced a total shrinkage porosity of 6.67%. The solidification time for the design without a riser was recorded at 225 seconds, while the design with a riser reached 282 seconds. The Niyama criterion for the design without a riser ranged from 3.70 to 7.40 (k.sec)^0.5/cm, while the design with a riser increased to 4.96 to 9.93 (k.sec)^0.5/cm. Among the three pouring temperature variations, 660°C provided the most optimal results. The combination of riser design and 660°C pouring temperature yielded the best casting quality.

Zitieren

APA

Firmansyah, V., Rulianto, J., & Novitasari, E. (2026). Analysis of Sand Casting Method in Manufacturing Ship Water Jet Propulsion Impeller Based on Software Simulation. WAVE: Jurnal Ilmiah Teknologi Maritim, 20(1), 56-67. https://doi.org/10.55981/wave.2026.12923

Vancouver

Firmansyah V, Rulianto J, Novitasari E. Analysis of Sand Casting Method in Manufacturing Ship Water Jet Propulsion Impeller Based on Software Simulation. WAVE: Jurnal Ilmiah Teknologi Maritim. 2026;20(1):56-67. doi:10.55981/wave.2026.12923

BibTeX
@article{Firmansyah2026,
  author = {Firmansyah, Vicky and Rulianto, Jangka and Novitasari, Eli},
  title = {Analysis of Sand Casting Method in Manufacturing Ship Water Jet Propulsion Impeller Based on Software Simulation},
  journal = {WAVE: Jurnal Ilmiah Teknologi Maritim},
  year = {2026},
  volume = {20},
  number = {1},
  pages = {56--67},
  doi = {10.55981/wave.2026.12923}
}
Kostenlos starten →