Effect of Laser Scanning Speed on Wettability and Lap Shear Strength of Laser-Engraved Carbon/Epoxy Single-Lap Joints
Indonesian Journal of Aerospace · 26.10.2026 · 24 (1) · 35-50
DOI: 10.55981/ijoa.2026.15928 ↗Kurz gefasst
Fachartikel in der Zeitschrift Indonesian Journal of Aerospace, online erschienen am 26.10.2026. Verfasst von Ryan Hidayat und 3 weiteren Autor:innen. Die Arbeit nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).
Abstract (Originalsprache)
Adhesive bonding is widely used for joining CFRP composite structures because it provides a lightweight, continuous, and structurally efficient connection compared with conventional joining methods. However, the relationship between laser scanning speed, surface characteristics, and bonding performance in CFRP single-lap joints remains insufficiently clarified, particularly compared with conventional mechanical abrasion. In this study, the effect of laser scanning speed on wettability and lap shear strength of laser engraved carbon/epoxy single-lap joints were investigated. Untreated and 800-grit sanded surfaces were used as references. The carbon/epoxy adherends were manufactured by Vacuum-Assisted Resin Infusion (VARI) and bonded with Araldite 420 according to ASTM D5868. Surface properties were studied by contact angle and roughness measurements, mechanical performance was studied by lap shear testing. The maximum lap shear strength was achieved at 50 mm/s, 12.530 ± 1.230 MPa, which is more than 45% higher than the untreated and sanded conditions. However, the difference in contact angle was not statistically significant but laser-treated specimens showed higher joint strength, indicating that the improvement of bonding was mainly due to the surface morphology modification by laser and mechanical interlocking. These results further show the importance of the laser scanning speed for the improvement of adhesive bonding of CFRP.
Zitieren
APA
Hidayat, R., Adhitya, M., Pratomo, R. A., & Abdurohman, K. (2026). Effect of Laser Scanning Speed on Wettability and Lap Shear Strength of Laser-Engraved Carbon/Epoxy Single-Lap Joints. Indonesian Journal of Aerospace, 24(1), 35-50. https://doi.org/10.55981/ijoa.2026.15928
Vancouver
Hidayat R, Adhitya M, Pratomo RA, Abdurohman K. Effect of Laser Scanning Speed on Wettability and Lap Shear Strength of Laser-Engraved Carbon/Epoxy Single-Lap Joints. Indonesian Journal of Aerospace. 2026;24(1):35-50. doi:10.55981/ijoa.2026.15928
BibTeX
@article{Hidayat2026,
author = {Hidayat, Ryan and Adhitya, Mohammad and Pratomo, Rezky Agung and Abdurohman, Kosim},
title = {Effect of Laser Scanning Speed on Wettability and Lap Shear Strength of Laser-Engraved Carbon/Epoxy Single-Lap Joints},
journal = {Indonesian Journal of Aerospace},
year = {2026},
volume = {24},
number = {1},
pages = {35--50},
doi = {10.55981/ijoa.2026.15928}
}
EUVIMED