EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

Evaluation of Adhesive Joint Performance in Aluminum Single-Lap Joints Using Experiments and FEA.

Rezky Agung Pratomo, Kosim Abdurohman, Riki Ardiansyah, Afid Nugroho, Fajar Ari Wandono, Awang Rahmadi Nuranto, Mochamad Chalid

Indonesian Journal of Aerospace · 26.10.2026 · 24 (1) · 1-16

DOI: 10.55981/ijoa.2026.15829 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Indonesian Journal of Aerospace, online erschienen am 26.10.2026. Verfasst von Rezky Agung Pratomo und 6 weiteren Autor:innen. Die Arbeit nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In order to assess adhesive performance, this work employed numerical simulations, single lap joint (SLJ) testing, and material characterization. Three different types of glue were analyzed for their mechanical behavior and joint performance. ASTM D638 was first used to evaluate the general adhesive qualities’ elastic modulus, strength, and ductility. In accordance with ASTM D5868, tensile testing was employed to evaluate the bonded SLJ’s structural performance. Finally, a simplified finite element analysis (FEA) model based on springs was developed to investigate stress distribution in more detail. The results showed significant variations in the mechanical response: high-modulus adhesives demonstrated better stiffness but lower strain capacity, while more ductile adhesives demonstrated lower strength. These experimental results demonstrate that the adhesive selection significantly affects the shear strength, deformation behavior, and failure mechanism of the overlap joint. The strongest junction was created by the adhesive with the highest modulus of elasticity; adhesives with lower moduli had a larger capacity for deformation but less strength. In accordance with conventional joint theory, modeling findings showed that shear stress was concentrated at the borders of the overlap area and decreased toward the center. Examining theoretical, experimental, and numerical findings reveals good agreement; the differences between the theoretical predictions and the simulation and experimental results are 5.59% and 1.51%, respectively. In summary, this study highlights the relationship between adhesive properties and joint performance and shows how simplified numerical models may precisely forecast the mechanical behavior and stress distribution in adhesive-bonded SLJ joints.

Zitieren

APA

Pratomo, R. A., Abdurohman, K., Ardiansyah, R., Nugroho, A., Wandono, F. A., Nuranto, A. R., & Chalid, M. (2026). Evaluation of Adhesive Joint Performance in Aluminum Single-Lap Joints Using Experiments and FEA. Indonesian Journal of Aerospace, 24(1), 1-16. https://doi.org/10.55981/ijoa.2026.15829

Vancouver

Pratomo RA, Abdurohman K, Ardiansyah R, Nugroho A, Wandono FA, Nuranto AR, et al. Evaluation of Adhesive Joint Performance in Aluminum Single-Lap Joints Using Experiments and FEA. Indonesian Journal of Aerospace. 2026;24(1):1-16. doi:10.55981/ijoa.2026.15829

BibTeX
@article{Pratomo2026,
  author = {Pratomo, Rezky Agung and Abdurohman, Kosim and Ardiansyah, Riki and Nugroho, Afid and Wandono, Fajar Ari and Nuranto, Awang Rahmadi and Chalid, Mochamad},
  title = {Evaluation of Adhesive Joint Performance in Aluminum Single-Lap Joints Using Experiments and FEA},
  journal = {Indonesian Journal of Aerospace},
  year = {2026},
  volume = {24},
  number = {1},
  pages = {1--16},
  doi = {10.55981/ijoa.2026.15829}
}
Kostenlos starten →