Numerical Simulation Analysis of Injector Placement for Optimum Fuel/Air Mixture in Mini Turbojet Combustion Chamber with 200N Static Thrust
Indonesian Journal of Aerospace · 09.11.2026 · 24 (1) · 17-34
DOI: 10.55981/ijoa.2026.13060 ↗Kurz gefasst
Fachartikel in der Zeitschrift Indonesian Journal of Aerospace, online erschienen am 09.11.2026. Verfasst von Vicky Wuwung und 4 weiteren Autor:innen. Die Arbeit nennt 18 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).
Abstract (Originalsprache)
A turbojet engine is a simple jet engine. Small turbojets utilize gas turbines to generate hot gas, which is then directed to the nozzle at a higher temperature. The development of mini turbojets at Polban began with the creation of combustion chamber geometry and the determination of the number and location of injectors for efficient combustion. The process of mixing fuel and air, as well as combustion within the combustion chamber of the mini turbojet with a thrust of 200 N, was analysed numerically in this study. This study employed a Computational Fluid Dynamics (CFD) approach based on the k-epsilon turbulence model to optimize the design of the annular combustion chamber with 154 air holes and 11 fuel injectors. Additionally, simulations of mixing and combustion within the combustion chamber were conducted as a form of validation. Based on the simulation results, changes in injector position caused an increase in the recirculation zone, which initially involved one injector out of eight, to eight out of eleven injectors, helping to maintain combustion stability and achieve thermal efficiency of 78.29%. With a temperature ratio (TR) of 3.064 and a pressure ratio (PR) of 0.39, the ideal airflow distribution produces toroidal vortices in the primary and secondary zones. With recommendations for further optimization to enhance performance under various operating conditions, these findings provide useful guidance for the development of a more stable and efficient mini-turbojet combustion chamber.
Zitieren
APA
Wuwung, V., Mulyadi, A. S., Anissa, R. F. N., Anggraeni, W., & Kartanegara, R. S. (2026). Numerical Simulation Analysis of Injector Placement for Optimum Fuel/Air Mixture in Mini Turbojet Combustion Chamber with 200N Static Thrust. Indonesian Journal of Aerospace, 24(1), 17-34. https://doi.org/10.55981/ijoa.2026.13060
Vancouver
Wuwung V, Mulyadi AS, Anissa RFN, Anggraeni W, Kartanegara RS. Numerical Simulation Analysis of Injector Placement for Optimum Fuel/Air Mixture in Mini Turbojet Combustion Chamber with 200N Static Thrust. Indonesian Journal of Aerospace. 2026;24(1):17-34. doi:10.55981/ijoa.2026.13060
BibTeX
@article{Wuwung2026,
author = {Wuwung, Vicky and Mulyadi, Aura Saum and Anissa, Reina Fadjrin Nurul and Anggraeni, Wenty and Kartanegara, Radi Suradi},
title = {Numerical Simulation Analysis of Injector Placement for Optimum Fuel/Air Mixture in Mini Turbojet Combustion Chamber with 200N Static Thrust},
journal = {Indonesian Journal of Aerospace},
year = {2026},
volume = {24},
number = {1},
pages = {17--34},
doi = {10.55981/ijoa.2026.13060}
}
EUVIMED