EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

A Comparison of Vacuum Infusion, Vacuum Bagging, and Hand Lay-Up Process on The Compressive and Shear Properties of GFRP Materials

Kosim Abdurohman, Rezky Agung Pratomo, Ryan Hidayat, Redha Akbar Ramadhan, Taufiq Satrio Nurtiasto, Riki Ardiansyah, Mikhael Gilang P.P.P.

Indonesian Journal of Aerospace · 2023

DOI: 10.55981/ijoa.2023.286 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Indonesian Journal of Aerospace, 2023. Verfasst von Kosim Abdurohman und 6 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fiber-reinforced plastics are widely used in aerospace, marine, military, automotive, wind turbine, sports, and civil engineering applications. GFRP is a common material used in engineering applications such as for UAV structural material. Several techniques that can be used in the composite structure manufacturing process are HLU, VB, and, VARI. This paper studies the influence of the three manufacturing processes on the compressive and shear properties of GFRP composites. This study uses e-glass fiber as reinforcement material and a clear epoxy polymer called lycal as matrix material. The composites were manufactured by using HLU, VB, and VARI processes. The specimen dimensions, compressive, and shear tests are following ASTM standards. The microstructural characteristics were observed using a scanning electron microscope. The compressive strength of VARI composite is higher than HLU and VB composites up to 71% and 53%, respectively. The shear strength of the VARI composite is higher than HLU and VB composites up to 71% and 53%, respectively.

Zitieren

APA

Abdurohman, K., Pratomo, R. A., Hidayat, R., Ramadhan, R. A., Nurtiasto, T. S., Ardiansyah, R., & P.P.P., M. G. (2023). A Comparison of Vacuum Infusion, Vacuum Bagging, and Hand Lay-Up Process on The Compressive and Shear Properties of GFRP Materials. Indonesian Journal of Aerospace. https://doi.org/10.55981/ijoa.2023.286

Vancouver

Abdurohman K, Pratomo RA, Hidayat R, Ramadhan RA, Nurtiasto TS, Ardiansyah R, et al. A Comparison of Vacuum Infusion, Vacuum Bagging, and Hand Lay-Up Process on The Compressive and Shear Properties of GFRP Materials. Indonesian Journal of Aerospace. 2023. doi:10.55981/ijoa.2023.286

BibTeX
@article{Abdurohman2023,
  author = {Abdurohman, Kosim and Pratomo, Rezky Agung and Hidayat, Ryan and Ramadhan, Redha Akbar and Nurtiasto, Taufiq Satrio and Ardiansyah, Riki and P.P.P., Mikhael Gilang},
  title = {A Comparison of Vacuum Infusion, Vacuum Bagging, and Hand Lay-Up Process on The Compressive and Shear Properties of GFRP Materials},
  journal = {Indonesian Journal of Aerospace},
  year = {2023},
  doi = {10.55981/ijoa.2023.286}
}
Kostenlos starten →