EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

System Modelling of Dye-Sensitized Solar Cells (DSSC) with Three Natural Dye Extracts Using Simulation MATLAB

I Gede Suputra Widharma, I Ketut Ta, I Gde Nyoman Sangka, I Made Budiada, I Nengah Sunaya, I Made Sajayasa, A.A.M. Dewi Anggreni

Contemporary Journal of Applied Sciences · 23.05.2026 · 4 (4) · 449-464

DOI: 10.55927/cjas.v4i4.168 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Contemporary Journal of Applied Sciences, online erschienen am 23.05.2026. Verfasst von I Gede Suputra Widharma und 6 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This article designs the modeling of the electrical parameters of dye-sensitized solar cells (DSSCs) using MATLAB simulation. An equivalent single diode circuit model is developed to simulate the physical parameters that affect the electron work in DSSCs. In this study, we investigate the suitability of natural dye extracts of Vernonia amygdalina (VAA), Goeppertia macrosepala (GMA) leaves and Cnestis ferruginea (CFA) fruit as photosensitizers in DSSCs. The influence of solvents on the performance of these three natural dye extracts is also examined. These coefficients are determined from existing UV-Vis analysis data. The model simulates the I-V and P-V characteristics of DSSCs sensitized with natural dyes at temperatures ranging from 17 to 37°C (290-310 K) and solar radiation intensity between 2-4 kWh/m². The results show that increasing the temperature slightly increases the voltage output, while higher solar radiation intensity significantly increases the current in all dyes. The validity of the model is confirmed through experimental data, with slight differences caused by the operating temperature in the experimental setup. Comparative analysis shows that dyes with higher absorption coefficients, such as GMA and VAA, produce higher current and power output than CFA. This study resulted in an effective MATLAB modeling to predict the performance of DSSCs with natural dyes and improve understanding and optimization.

Zitieren

APA

Widharma, I. G. S., Ta, I. K., Sangka, I. G. N., Budiada, I. M., Sunaya, I. N., Sajayasa, I. M., & Anggreni, A. D. (2026). System Modelling of Dye-Sensitized Solar Cells (DSSC) with Three Natural Dye Extracts Using Simulation MATLAB. Contemporary Journal of Applied Sciences, 4(4), 449-464. https://doi.org/10.55927/cjas.v4i4.168

Vancouver

Widharma IGS, Ta IK, Sangka IGN, Budiada IM, Sunaya IN, Sajayasa IM, et al. System Modelling of Dye-Sensitized Solar Cells (DSSC) with Three Natural Dye Extracts Using Simulation MATLAB. Contemporary Journal of Applied Sciences. 2026;4(4):449-464. doi:10.55927/cjas.v4i4.168

BibTeX
@article{Widharma2026,
  author = {Widharma, I Gede Suputra and Ta, I Ketut and Sangka, I Gde Nyoman and Budiada, I Made and Sunaya, I Nengah and Sajayasa, I Made and Anggreni, A.A.M. Dewi},
  title = {System Modelling of Dye-Sensitized Solar Cells (DSSC) with Three Natural Dye Extracts Using Simulation MATLAB},
  journal = {Contemporary Journal of Applied Sciences},
  year = {2026},
  volume = {4},
  number = {4},
  pages = {449--464},
  doi = {10.55927/cjas.v4i4.168}
}
Kostenlos starten →