EUVIMEDEUVIMED entdecken
Crossref

EARLY DETECTION OF DEGRADATION IN THE STRUCTURAL BASE OF A CNC MACHINING CENTER THROUGH VIBRATION ANALYSIS AND FOURIER TRANSFORM FOR PREVENTIVE MAINTENANCE

Jesús Hermosillo Quintana, Ramón Anchondo Pérez, Arión Ehécatl Juárez Menchaca, María de Lourdes Flores Portillo

Revista Gestão e Conhecimento · 25.03.2026 · 20 (1) · e543

DOI: 10.55908/rgcv20n1-008 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Revista Gestão e Conhecimento, online erschienen am 25.03.2026. Verfasst von Jesús Hermosillo Quintana und 3 weiteren Autor:innen. Die Arbeit nennt 8 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study proposes a simplified approach for the early detection of degradation in the structural base of a CNC machining center through vibration analysis and the Fast Fourier Transform (FFT), with the purpose of supporting preventive maintenance decisions. The industrial relevance of the study lies in the fact that the stiffness and dynamic condition of machine-tool supports affect machining performance, vibration behavior, and the identification of natural frequencies under operational conditions. The main objective was to develop a decision-support model capable of relating variations in dynamic response to maintenance recommendations. The methodology was based on a numerical simulation in which the CNC machine base was represented as a single-degree-of-freedom mass-spring-damper system subjected to simplified machining-related excitations. Four condition scenarios were evaluated: healthy condition, slight degradation, moderate degradation, and severe degradation, represented by progressive reductions in equivalent stiffness. The generated vibration signals were processed in the frequency domain using the Fourier Transform, allowing the identification of shifts in natural frequency associated with degradation. The results show that stiffness reduction produces measurable changes in the frequency spectrum and enables the classification of the machine condition into preventive maintenance categories. It is concluded that the proposed approach offers a simple and replicable basis for vibration-based monitoring of CNC structural bases and may support preventive maintenance strategies in machining environments.

Zitieren

APA

Quintana, J. H., Pérez, R. A., Menchaca, A. E. J., & Portillo, M. D. L. F. (2026). EARLY DETECTION OF DEGRADATION IN THE STRUCTURAL BASE OF A CNC MACHINING CENTER THROUGH VIBRATION ANALYSIS AND FOURIER TRANSFORM FOR PREVENTIVE MAINTENANCE. Revista Gestão e Conhecimento, 20(1), e543. https://doi.org/10.55908/rgcv20n1-008

Vancouver

Quintana JH, Pérez RA, Menchaca AEJ, Portillo MDLF. EARLY DETECTION OF DEGRADATION IN THE STRUCTURAL BASE OF A CNC MACHINING CENTER THROUGH VIBRATION ANALYSIS AND FOURIER TRANSFORM FOR PREVENTIVE MAINTENANCE. Revista Gestão e Conhecimento. 2026;20(1):e543. doi:10.55908/rgcv20n1-008

BibTeX
@article{Quintana2026,
  author = {Quintana, Jesús Hermosillo and Pérez, Ramón Anchondo and Menchaca, Arión Ehécatl Juárez and Portillo, María de Lourdes Flores},
  title = {EARLY DETECTION OF DEGRADATION IN THE STRUCTURAL BASE OF A CNC MACHINING CENTER THROUGH VIBRATION ANALYSIS AND FOURIER TRANSFORM FOR PREVENTIVE MAINTENANCE},
  journal = {Revista Gestão e Conhecimento},
  year = {2026},
  volume = {20},
  number = {1},
  pages = {e543},
  doi = {10.55908/rgcv20n1-008}
}
Kostenlos starten →