Flow analyzer: construction and validation of a prototype for the evaluation of pulmonary ventilators
Cuadernos de Educación y Desarrollo · 25.06.2026 · 18 (6) · e11011
DOI: 10.55905/cuadv18n6-034 ↗Kurz gefasst
Fachartikel in der Zeitschrift Cuadernos de Educación y Desarrollo, online erschienen am 25.06.2026. Verfasst von Diogo Magalhães de Sousa und 1 weiteren Autor:innen. Die Arbeit nennt 25 Literaturangaben.
Abstract (Originalsprache)
Periodic calibration of pulmonary ventilators is essential for patient safety in intensive care units; however, the high cost of commercial analyzers limits access to this technology. Therefore, this work aims to develop and validate a low-cost embedded prototype of a flow analyzer. For its construction, the hardware architecture was based on the Arduino Mega 2560 platform and MPX5050GP sensors coupled to a pneumotachograph. The hardware was responsible for signal conditioning, and the firmware for parameter calculation. For validation, laboratory tests were performed using a Servo-Air ventilator as a reference, following ABNT NBR ISO 80601-2-12 guidelines. The results showed that the prototype met the acceptance criteria for respiratory rate, PIP, and PEEP. Mathematical corrections ensured that tidal volume and inspiratory time remained within the required margins. The total cost of materials was US$ 349. It is concluded that the prototype fulfills its purpose as an accessible biomedical instrumentation tool, with potential for teaching, research, and inspection in clinical engineering.
Zitieren
APA
Sousa, D. M. D., & Silva, M. G. N. M. D. (2026). Flow analyzer: construction and validation of a prototype for the evaluation of pulmonary ventilators. Cuadernos de Educación y Desarrollo, 18(6), e11011. https://doi.org/10.55905/cuadv18n6-034
Vancouver
Sousa DMD, Silva MGNMD. Flow analyzer: construction and validation of a prototype for the evaluation of pulmonary ventilators. Cuadernos de Educación y Desarrollo. 2026;18(6):e11011. doi:10.55905/cuadv18n6-034
BibTeX
@article{Sousa2026,
author = {Sousa, Diogo Magalhães de and Silva, Marilú Gomes Netto Monte da},
title = {Flow analyzer: construction and validation of a prototype for the evaluation of pulmonary ventilators},
journal = {Cuadernos de Educación y Desarrollo},
year = {2026},
volume = {18},
number = {6},
pages = {e11011},
doi = {10.55905/cuadv18n6-034}
}
EUVIMED