Comparative evaluation of the dimensional compatibility of ISO #30/.06 gutta-percha cones from four different manufacturers using an endodontic gauge
International Dental Research · 11.07.2026 · 16 (S1) · e260664
DOI: 10.5577/intdentres.664 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Dental Research, online erschienen am 11.07.2026. Verfasst von Kumru Şaz und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Aim
Gutta-percha is the most commonly used biocompatible obturation material in endodontics for the three-dimensional and hermetic sealing of the root canal system. However, despite the dimensions defined in the ISO 6877 standard, dimensional discrepancies between gutta-percha cones and endodontic files have been reported. The aim of this study was to comparatively evaluate the dimensional variability of ISO #30/.06 gutta-percha cones from four different manufacturers using an endodontic gauge. Methodology: A total of 240 ISO #30/.06 gutta-percha cones (n = 60 per brand) from four manufacturers (ProTaper Ultimate, MetaBiomed, Diadent, and EndoArt) were evaluated. Cone diameters were measured at the D0, D5, D10, and D15 levels using a Woodpecker R1 Plus endodontic gauge. Based on the ISO 6877 nominal dimensions, measurements were categorized as undersized, within the nominal range, or oversized. Statistical analysis was performed using Pearson's chi-square and Fisher's exact tests with Bonferroni correction (p < 0.05).
Results
Dimensional discrepancies from the nominal ISO values were observed across all measurement levels, with statistically significant differences among the brands (p < 0.05). ProTaper Ultimate and MetaBiomed showed the highest compatibility with nominal dimensions, whereas EndoArt exhibited a consistently high proportion of undersized cones (57.1–67.2%) across all regions. Diadent showed a notably high proportion of oversized cones at the D15 level (66.7%). Effect sizes for between-brand comparisons were large at every level (Cramer's V = 0.386–0.503).
Conclusion
ISO #30/.06 gutta-percha cones from different manufacturers did not show complete dimensional compatibility. These discrepancies may adversely affect apical adaptation, particularly in single-cone obturation techniques, potentially reducing clinical success. The use of an endodontic gauge provides a practical means of objectively verifying cone–canal adaptation in clinical practice, helping to prevent microleakage and obturation errors.
Zitieren
APA
Şaz, K., Nalbant, H. N., & Topbaş, C. (2026). Comparative evaluation of the dimensional compatibility of ISO #30/.06 gutta-percha cones from four different manufacturers using an endodontic gauge. International Dental Research, 16(S1), e260664. https://doi.org/10.5577/intdentres.664
Vancouver
Şaz K, Nalbant HN, Topbaş C. Comparative evaluation of the dimensional compatibility of ISO #30/.06 gutta-percha cones from four different manufacturers using an endodontic gauge. International Dental Research. 2026;16(S1):e260664. doi:10.5577/intdentres.664
BibTeX
@article{az2026,
author = {Şaz, Kumru and Nalbant, Hülya Nur and Topbaş, Celalettin},
title = {Comparative evaluation of the dimensional compatibility of ISO #30/.06 gutta-percha cones from four different manufacturers using an endodontic gauge},
journal = {International Dental Research},
year = {2026},
volume = {16},
number = {S1},
pages = {e260664},
doi = {10.5577/intdentres.664}
}
EUVIMED