EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

SUSTAINABLE ACOUSTIC ENCLOSURE USING RUBBERWOOD PROCESSING BY-PRODUCTS AND NATURAL RUBBER LATEX

Warangkana Na-Phatthalung, Nasreen Lanja, Teeraphat Tangulrot

Suranaree Journal of Science and Technology · 03.11.2026 · 33 (5)

DOI: 10.55766/sujst13728 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Suranaree Journal of Science and Technology, online erschienen am 03.11.2026. Verfasst von Warangkana Na-Phatthalung und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Noise generated by industrial machinery, particularly air compressors, requires effective and sustainable control measures. This study developed and evaluated a detachable acoustic enclosure incorporating eco-friendly sound-absorbing panels fabricated from rubberwood processing by-products-sawdust and biomass bottom ash-bonded with natural rubber latex (NRL) as a bio-based binder. The optimal compositions for achieving dimensional stability, adhesion, and moldability were identified through panel fabrication experiments as sawdust–NRL composite (1:1.5) and sawdust/ash-NRL composite (0.5:0.5:1). Physical characterization showed that sawdust/ash composite panels exhibited higher bulk density due to ash-induced matrix densification. The acoustic performance of the developed materials was assessed over the 125-4,000 Hz frequency range using wooden enclosures lined with various absorptive materials, with results revealing clear frequency-dependent noise attenuation. At low frequencies (125-250 Hz), the wooden enclosure without lining provided the greatest attenuation due to resonant panel absorption. In the mid-frequency range (250-2,000 Hz), sawdust and sawdust/ash composite panels exhibited higher sound attenuation efficiency than conventional polyurethane and polystyrene foams, highlighting the role of porous biomass structures in acoustic energy dissipation. At high frequencies (2,000-4,000 Hz), the biomass-based panels outperformed the synthetic foams, with sawdust composites achieving noise reductions of up to 25 dBA, corresponding to ~95% reduction based on linear sound pressure levels. This study demonstrates the potential of biomass-based acoustic materials as practical and sustainable solutions for noise control in small-scale industrial environments, offering an effective alternative to conventional synthetic absorbers for improving occupational acoustic conditions.

Zitieren

APA

Na-Phatthalung, W., Lanja, N., & Tangulrot, T. (2026). SUSTAINABLE ACOUSTIC ENCLOSURE USING RUBBERWOOD PROCESSING BY-PRODUCTS AND NATURAL RUBBER LATEX. Suranaree Journal of Science and Technology, 33(5). https://doi.org/10.55766/sujst13728

Vancouver

Na-Phatthalung W, Lanja N, Tangulrot T. SUSTAINABLE ACOUSTIC ENCLOSURE USING RUBBERWOOD PROCESSING BY-PRODUCTS AND NATURAL RUBBER LATEX. Suranaree Journal of Science and Technology. 2026;33(5). doi:10.55766/sujst13728

BibTeX
@article{NaPhatthalung2026,
  author = {Na-Phatthalung, Warangkana and Lanja, Nasreen and Tangulrot, Teeraphat},
  title = {SUSTAINABLE ACOUSTIC ENCLOSURE USING RUBBERWOOD PROCESSING BY-PRODUCTS AND NATURAL RUBBER LATEX},
  journal = {Suranaree Journal of Science and Technology},
  year = {2026},
  volume = {33},
  number = {5},
  doi = {10.55766/sujst13728}
}
Kostenlos starten →