Influence of Plasticizer Type on Starch-Based Nanocomposite Films Reinforced with CMC and ZnO
Journal of Research and Technology · 30.06.2026 · 12 (1) · 1-11
DOI: 10.55732/2jee9e84 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Research and Technology, online erschienen am 30.06.2026. Verfasst von Kintan Ari Kinanti und 8 weiteren Autor:innen.
Abstract (Originalsprache)
The development of eco-friendly composite films from renewable resources represents a crucial strategy to reduce dependence on petroleum-based plastics. In this study, carboxymethyl cellulose (CMC) derived from oil palm empty fruit bunches (OPEFB) was utilized along with starch and zinc oxide nanoparticles (ZnO NPs) to fabricate biodegradable composite films. Two types of plasticizers, glycerol and sorbitol, were incorporated at varying concentrations of 20%, 30%, and 40% to evaluate their influence on the physical properties of the films, including density, thickness, moisture content, water absorption, and tensile strength. The results revealed that both plasticizers affected the structural and physical characteristics of the films. Sorbitol addition decreased density from 1.413 g/cm³ to 0.463 g/cm³ and increased moisture content and water absorption, whereas glycerol addition increased density from 1.330 g/cm³ to 1.559 g/cm³ and reduced moisture content and water absorption. The formulation containing 20% glycerol showed optimal results for higher density and water resistance, while 40% sorbitol provided superior performance with enhanced mechanical integrity and lower water sensitivity. Overall, the type and concentration of plasticizer play a critical role in determining the physical properties of OPEFB-derived CMC/starch/ZnO nanocomposite films, demonstrating their potential as environmentally friendly packaging materials to replace conventional plastics.
Zitieren
APA
Kinanti, K. A., Lestary, R. A., Berliana, N., Alfernando, O., Prabasari, I. G., Nazarudin, Raudhatussya'rifah, R., Sipayung, R., & Mundarti, S. (2026). Influence of Plasticizer Type on Starch-Based Nanocomposite Films Reinforced with CMC and ZnO. Journal of Research and Technology, 12(1), 1-11. https://doi.org/10.55732/2jee9e84
Vancouver
Kinanti KA, Lestary RA, Berliana N, Alfernando O, Prabasari IG, Nazarudin, et al. Influence of Plasticizer Type on Starch-Based Nanocomposite Films Reinforced with CMC and ZnO. Journal of Research and Technology. 2026;12(1):1-11. doi:10.55732/2jee9e84
BibTeX
@article{Kinanti2026,
author = {Kinanti, Kintan Ari and Lestary, Rara Ayu and Berliana, Nita and Alfernando, Oki and Prabasari, Ira Galih and Nazarudin and Raudhatussya'rifah, Ra'ida and Sipayung, Rosmawati and Mundarti, Sri},
title = {Influence of Plasticizer Type on Starch-Based Nanocomposite Films Reinforced with CMC and ZnO},
journal = {Journal of Research and Technology},
year = {2026},
volume = {12},
number = {1},
pages = {1--11},
doi = {10.55732/2jee9e84}
}
EUVIMED