EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Minimasi Waste Untuk Perbaikan Proses Produksi Kantong Kemasan Dengan Pendekatan Lean Manufacturing

Nanang Wicaksono, Novi Hendra Wirawan, Hendra Suwardana, Anggia Kalista, Ary Setiawan, Moh. Muhyidin Agus Wibowo, Sholihah Az-zahro'

IMEJ (Industrial Management and Engineering Journal) · 31.12.2025 · 4 (1) · 12-24

DOI: 10.55719/imej.v4i1.2189 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IMEJ (Industrial Management and Engineering Journal), online erschienen am 31.12.2025. Verfasst von Nanang Wicaksono und 6 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The increasingly intense competition in the manufacturing industry requires companies to continuously improve the productivity and effectiveness of production machinery. PT Industri Kemasan Semen Gresik, as a cement packaging manufacturer, faces challenges in the form of high downtime and defective products in the Tuber Buttomer machine, particularly on Line 4. Based on data from January to April 2025, the Tuber Buttomer Line 4 recorded the highest total downtime compared to other lines, amounting to 6,720 minutes, as well as fluctuating defect rates of 1.13% in January, 1.07% in February, 1.31% in March, and 1.46% in April. This study aims to measure the effectiveness of the machine using the Overall Equipment Effectiveness (OEE) method, identify dominant loss factors based on the Six Big Losses concept, and formulate improvement recommendations using the Failure Mode and Effect Analysis (FMEA) method. The study utilizes historical production, downtime, and defect data during the research period. The results indicate that the decrease in machine effectiveness is significantly influenced by downtime losses and speed losses, particularly breakdown losses and reduced speed losses. Furthermore, FMEA is applied to determine the priority of failure causes based on the Risk Priority Number (RPN), resulting in improvement recommendations focused on enhancing the machine maintenance system and operational control. This study is expected to serve as a basis for the company in reducing downtime, minimizing defective products, and improving machine effectiveness and productivity in a sustainable manner.

Zitieren

APA

Wicaksono, N., Wirawan, N. H., Suwardana, H., Kalista, A., Setiawan, A., Wibowo, M. M. A., & Az-zahro', S. (2025). Minimasi Waste Untuk Perbaikan Proses Produksi Kantong Kemasan Dengan Pendekatan Lean Manufacturing. IMEJ (Industrial Management and Engineering Journal), 4(1), 12-24. https://doi.org/10.55719/imej.v4i1.2189

Vancouver

Wicaksono N, Wirawan NH, Suwardana H, Kalista A, Setiawan A, Wibowo MMA, et al. Minimasi Waste Untuk Perbaikan Proses Produksi Kantong Kemasan Dengan Pendekatan Lean Manufacturing. IMEJ (Industrial Management and Engineering Journal). 2025;4(1):12-24. doi:10.55719/imej.v4i1.2189

BibTeX
@article{Wicaksono2025,
  author = {Wicaksono, Nanang and Wirawan, Novi Hendra and Suwardana, Hendra and Kalista, Anggia and Setiawan, Ary and Wibowo, Moh. Muhyidin Agus and Az-zahro', Sholihah},
  title = {Minimasi Waste Untuk Perbaikan Proses Produksi Kantong Kemasan Dengan Pendekatan Lean Manufacturing},
  journal = {IMEJ (Industrial Management and Engineering Journal)},
  year = {2025},
  volume = {4},
  number = {1},
  pages = {12--24},
  doi = {10.55719/imej.v4i1.2189}
}
Kostenlos starten →