Utilization of scrap in casting process to increase inventory turnover: A case study in a Thai foundry
Journal of Metals, Materials and Minerals · 12.11.2026 · 37 (1) · e2733
DOI: 10.55713/jmmm.v37i1.2733 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Metals, Materials and Minerals, online erschienen am 12.11.2026. Verfasst von Suchanart NIAMSORN und 1 weiteren Autor:innen. Die Arbeit nennt 16 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
This research aims to enhance inventory turnover by optimizing the utilization of in-house riser scrap in a Thai foundry manufacturing EN 1.4469 stainless steel casting. The foundry currently faces a challenge with excess riser scrap containing high carbon content, which restricts its reuse in the melting process. To address this issue, a mixture design approach using quadratic regression analysis was applied to develop a predictive model for carbon content based on four charge material components: iron, gate-and-runner scrap, high-carbon riser scrap, and additives. Historical production data from 2022 were analyzed, and the optimal charge composition was identified through response optimization. The resulting model exhibited high predictive accuracy, with an adjusted R2 of 94.20% and a mean absolute percentage error (MAPE) of less than 10%. Implementation of the optimized charge mix increased the average proportion of riser scrap from 3% to 13%, leading to a significant improvement in inventory turnover from 47 to 128 within a two-month period. These findings demonstrate the practical value of integrating statistical modeling into foundry operations to improve material efficiency and reduce production waste.
Zitieren
APA
NIAMSORN, S., & TANGJITSITCHAROEN, D. (2026). Utilization of scrap in casting process to increase inventory turnover: A case study in a Thai foundry. Journal of Metals, Materials and Minerals, 37(1), e2733. https://doi.org/10.55713/jmmm.v37i1.2733
Vancouver
NIAMSORN S, TANGJITSITCHAROEN D. Utilization of scrap in casting process to increase inventory turnover: A case study in a Thai foundry. Journal of Metals, Materials and Minerals. 2026;37(1):e2733. doi:10.55713/jmmm.v37i1.2733
BibTeX
@article{NIAMSORN2026,
author = {NIAMSORN, Suchanart and TANGJITSITCHAROEN, Dr.Somkiat},
title = {Utilization of scrap in casting process to increase inventory turnover: A case study in a Thai foundry},
journal = {Journal of Metals, Materials and Minerals},
year = {2026},
volume = {37},
number = {1},
pages = {e2733},
doi = {10.55713/jmmm.v37i1.2733}
}
EUVIMED