Cold sintering-assisted low temperature fabrication of dense Ba\(_{5}\)Nb\(_{4}\)O\(_{15}\) ceramics
Journal of Metals, Materials and Minerals · 04.06.2026 · 36 (2) · e2564
DOI: 10.55713/jmmm.v36i2.2564 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Metals, Materials and Minerals, online erschienen am 04.06.2026. Verfasst von Usa SUKKHA und 6 weiteren Autor:innen. Die Arbeit nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
AbstractThis study presents a novel approach for fabricating Ba5Nb4O15 (BNO) ceramics at low sintering temperatures via the cold sintering process (CSP), using Ba(OH)2∙8H2O (BOH) as a transient liquid phase. CSP was performed under an external pressure of 10 MPa with a sintering temperature range of 150℃ to 300℃. Optimally, BNO-BOH ceramics achieved a relative density of 93.7 ± 0.43% when sintered at 250℃ for 1 h. Scanning electron microscopy (SEM) suggested that particle densification occurred via a dissolution-precipitation process, which filled pores and formed necks between particles. The study demonstrates that the residual liquid content is crucial for ceramic densification. Annealing the as-cold sintered BNO-BOH ceramics at 1000℃ for 1 h successfully eliminates the BaCO3 secondary phase. Furthermore, dielectric properties of annealed ceramics were also characterized at room temperature from frequency range of 20 Hz to 2 MHz. The dielectric permittivity is reported to be 39.2 and 0.01 for tan δ at 1.8 MHz. The cold sintering process provides an effective strategy to reduce the sintering temperature while achieving high relative density. This method offers a promising alternative for the fabrication of advanced ceramics.
Zitieren
APA
SUKKHA, U., TEANDAM, A., PAKAWANIT, P., KAMONPHA, P., VITTAYAKORN, W., PULPHOL, P., & VITTAYAKORN, N. (2026). Cold sintering-assisted low temperature fabrication of dense Ba\(_{5}\)Nb\(_{4}\)O\(_{15}\) ceramics. Journal of Metals, Materials and Minerals, 36(2), e2564. https://doi.org/10.55713/jmmm.v36i2.2564
Vancouver
SUKKHA U, TEANDAM A, PAKAWANIT P, KAMONPHA P, VITTAYAKORN W, PULPHOL P, et al. Cold sintering-assisted low temperature fabrication of dense Ba\(_{5}\)Nb\(_{4}\)O\(_{15}\) ceramics. Journal of Metals, Materials and Minerals. 2026;36(2):e2564. doi:10.55713/jmmm.v36i2.2564
BibTeX
@article{SUKKHA2026,
author = {SUKKHA, Usa and TEANDAM, Apichayaporn and PAKAWANIT, Phakkhananan and KAMONPHA, Phitsamai and VITTAYAKORN, Wanwilai and PULPHOL, Phieraya and VITTAYAKORN, Naratip},
title = {Cold sintering-assisted low temperature fabrication of dense Ba\(_5\)Nb\(_4\)O\(_15\) ceramics},
journal = {Journal of Metals, Materials and Minerals},
year = {2026},
volume = {36},
number = {2},
pages = {e2564},
doi = {10.55713/jmmm.v36i2.2564}
}
EUVIMED