Surface modification of activated carbon from sago waste
Journal of Metals, Materials and Minerals · 28.03.2023 · 33 (1) · 95-100
DOI: 10.55713/jmmm.v33i1.1616 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Metals, Materials and Minerals, online erschienen am 28.03.2023. Verfasst von Octolia TOGIBASA und 4 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
In this paper, we analyzed the effect of surface modification on the surface properties of the active carbon from sago waste using varied oxidizers, namely H2O2, HNO3, and H2SO4. The ordinary active carbon has an initial surface area of 546.6 m2∙g-1, with a phenol and carboxylic functional group. The porosity, functional groups and morphological surface, together with the chemical composition of activated carbon were examined using a nitrogen adsorption-desorption through the Brunauer Emmett Teller (BET) method and the calculation of Barret-Joyner-Hall (BJH), a Fourier-transformed infrared spectroscopy, and a scanning electron microscopy with energy dispersive spectroscopy. The results found that the modified activated carbon significantly increased surface area and total pore volume. Activated carbon modified using H2SO4 oxidizers has the highest surface area value of 853.6 m2∙g-1 and a total pore volume value of 0.585 cm3∙g-1. In addition, the surface modification has changed carbon's porosity from micropore to mesopore, altered the surface functional group from phenol to ether. The surface modification has improved its adsorption capacity and potentially further its application. In conclusion, modifying the surface could make the properties closer to the standards for commercial activated carbon.
Zitieren
APA
TOGIBASA, O., DAHLAN, K., ANSANAY, Y. O., RUNGGAWERI, A. F., & MERANI, M. (2023). Surface modification of activated carbon from sago waste. Journal of Metals, Materials and Minerals, 33(1), 95-100. https://doi.org/10.55713/jmmm.v33i1.1616
Vancouver
TOGIBASA O, DAHLAN K, ANSANAY YO, RUNGGAWERI AF, MERANI M. Surface modification of activated carbon from sago waste. Journal of Metals, Materials and Minerals. 2023;33(1):95-100. doi:10.55713/jmmm.v33i1.1616
BibTeX
@article{TOGIBASA2023,
author = {TOGIBASA, Octolia and DAHLAN, Khaeriah and ANSANAY, Yane Oktovina and RUNGGAWERI, Alda Filadelfi and MERANI, Marlifon},
title = {Surface modification of activated carbon from sago waste},
journal = {Journal of Metals, Materials and Minerals},
year = {2023},
volume = {33},
number = {1},
pages = {95--100},
doi = {10.55713/jmmm.v33i1.1616}
}
EUVIMED