EUVIMEDEUVIMED entdecken
Crossref

GURSON-TVERGAARD-NEEDLEMAN (GTN) PARAMETERS OF DP STEELS WITH DIFFERENT ROLLING DIRECTIONS WERE DETERMINED AND INVESTIGATED AT DIFFERENT STRAIN RATES

Labinot TOPİLLA, Serkan TOROS

Eurasian Journal of Science Engineering and Technology · 2022

DOI: 10.55696/ejset.1113577 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Eurasian Journal of Science Engineering and Technology, 2022. Verfasst von Labinot TOPİLLA und 1 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 19 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Dual Phase steels are high-strength and well-formability steels, which are widely used in the automobile industry. However, based on their microstructural observations, the shapes, orientations, and directions of the grains of these two steels are different and vary depending on the degree of observation. Therefore, the objective of this research was to compare the stress and strain distribution at different strain rates of standard specimens and cut at different rolling directions of DP steels, namely DP600 and DP800 steels. Besides, in this study, the finite element modeling method is used through optimization to determine the GTN fracture failure, constitutive and nucleation parameters of the mentioned steels based on their rolling directions and strain rates. The experimental and numerical simulation results are also compared, and they are in good agreement.

Zitieren

APA

TOPİLLA, L., & TOROS, S. (2022). GURSON-TVERGAARD-NEEDLEMAN (GTN) PARAMETERS OF DP STEELS WITH DIFFERENT ROLLING DIRECTIONS WERE DETERMINED AND INVESTIGATED AT DIFFERENT STRAIN RATES. Eurasian Journal of Science Engineering and Technology. https://doi.org/10.55696/ejset.1113577

Vancouver

TOPİLLA L, TOROS S. GURSON-TVERGAARD-NEEDLEMAN (GTN) PARAMETERS OF DP STEELS WITH DIFFERENT ROLLING DIRECTIONS WERE DETERMINED AND INVESTIGATED AT DIFFERENT STRAIN RATES. Eurasian Journal of Science Engineering and Technology. 2022. doi:10.55696/ejset.1113577

BibTeX
@article{TOPLLA2022,
  author = {TOPİLLA, Labinot and TOROS, Serkan},
  title = {GURSON-TVERGAARD-NEEDLEMAN (GTN) PARAMETERS OF DP STEELS WITH DIFFERENT ROLLING DIRECTIONS WERE DETERMINED AND INVESTIGATED AT DIFFERENT STRAIN RATES},
  journal = {Eurasian Journal of Science Engineering and Technology},
  year = {2022},
  doi = {10.55696/ejset.1113577}
}
Kostenlos starten →