Influence of Mix Proportions on the Compressive Strength of Concrete: A Statistical Analysis of 1030 Concrete Mixtures
Journal for Research in Applied Sciences and Biotechnology · 12.06.2026 · 5 (1) · 161-170
DOI: 10.55544/jrasb.icaces.20 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal for Research in Applied Sciences and Biotechnology, online erschienen am 12.06.2026. Verfasst von Ibrahim Siddique und 1 weiteren Autor:innen. Die Arbeit nennt 13 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
The compressive strength of concrete is governed by a complex interaction of its constituent proportions, the water-to-binder ratio, the use of supplementary cementitious materials, and the age of curing. This study presents a statistical investigation of these relationships using a consolidated dataset of 1030 concrete mixtures containing eight measured parameters: cement, ground granulated blast-furnace slag, fly ash, water, superplasticiser, coarse aggregate, fine aggregate, and curing age. Engineered parameters including the water-to-binder ratio, total binder content, and supplementary cementitious material replacement level were derived to interpret strength behaviour through established concrete technology principles. Descriptive statistics, Pearson and Spearman correlation analysis, banded grouping, and ordinary least-squares regression were employed. The results confirm the classical inverse relationship between the water-to-binder ratio and strength, with mean strength declining from 52.96 MPa at ratios below 0.35 to 17.67 MPa at ratios above 0.65. Cement content and curing age emerged as the strongest positive determinants of strength, while water content showed the strongest negative association. A logarithmic strength-age relationship was observed, and a multi-parameter empirical equation explained approximately 62 percent of the variance in compressive strength. The findings reaffirm fundamental mix-design principles on a large heterogeneous dataset and provide a transparent, practitioner-usable predictive equation for preliminary proportioning. By demonstrating that moderate replacement of cement with industrial by-products such as slag and fly ash can maintain compressive strength, the work supports the United Nations Sustainable Development Goals relating to resilient infrastructure (SDG 9), sustainable cities and communities (SDG 11), and responsible consumption and production (SDG 12).
Zitieren
APA
Siddique, I., & Raman, S. (2026). Influence of Mix Proportions on the Compressive Strength of Concrete: A Statistical Analysis of 1030 Concrete Mixtures. Journal for Research in Applied Sciences and Biotechnology, 5(1), 161-170. https://doi.org/10.55544/jrasb.icaces.20
Vancouver
Siddique I, Raman S. Influence of Mix Proportions on the Compressive Strength of Concrete: A Statistical Analysis of 1030 Concrete Mixtures. Journal for Research in Applied Sciences and Biotechnology. 2026;5(1):161-170. doi:10.55544/jrasb.icaces.20
BibTeX
@article{Siddique2026,
author = {Siddique, Ibrahim and Raman, Sphurty},
title = {Influence of Mix Proportions on the Compressive Strength of Concrete: A Statistical Analysis of 1030 Concrete Mixtures},
journal = {Journal for Research in Applied Sciences and Biotechnology},
year = {2026},
volume = {5},
number = {1},
pages = {161--170},
doi = {10.55544/jrasb.icaces.20}
}
EUVIMED