Modification of mechanical properties of silty soils by biopolymers for construction purposes
Croatian journal of forest engineering · 2027 · 48 (1)
DOI: 10.5552/crojfe.2027.4524 ↗Kurz gefasst
Fachartikel in der Zeitschrift Croatian journal of forest engineering, online erschienen am 17.11.2026. Verfasst von Aidin Parsakhoo und 1 weiteren Autor:innen.
Abstract (Originalsprache)
Silty soils tend to deform plastically, erode and slide downward easily when exposed to moisture in the Hyrcanian forests of Iran. Biopolymers are an approach to overcome negative effects of silty soils; however, the effect of biopolymers on mechanical properties of this specific type of soil is not clear. The present experimental study investigated the efficacy of xanthan gum (XG), guar gum (GG), and beta-glucan (BG) on the Atterberg limits, maximum dry density (MDD), and California Bearing Ratio (CBR) of a high plasticity silty soil (MH). Each biopolymer was applied at dosages of 0, 0.1, 0.2, 0.4, and 0.6% and cured for 7 and 28 days. Atterberg limits (ASTM D4318), grain size distribution (ASTM D 422-63), proctor density (ASTM D1557) and bearing ratio (ASTM D1883) of treated MH soil was done in three replications. The results showed that the liquid limit (LL), plastic limit (PL), and plasticity index (PI) of the treated samples decreased with increasing of XG. A change in soil class from MH to low-plasticity silt (ML) was observed with the addition of 0.2% and 0.4% BG. The highest increase in MDD (+10.9%) and CBR (+60.0%) of MH soils was recorded with the addition of 0.4% BG. Therefore, in this treatment, the MDD and CBR reached 1.73 g cm-3 and 12.24%, respectively, after 28 days. Based on our findings, adding GG to MH soils did not yield favorable results compared to other treatments (5.1% increase in MDD and 20.0% increase in CBR). The optimum dosage was found to be 0.2% for GG and 0.4% for BG, while a notably higher dosage of 0.6% was deemed optimum for XG. These findings suggest that the mechanical characteristics of MH soils treated with BG solutions can be effectively utilized for road sub-base improvement applications in forest ecosystems.
Zitieren
APA
Parsakhoo, A., & Hosseini, S. A. (2027). Modification of mechanical properties of silty soils by biopolymers for construction purposes. Croatian journal of forest engineering, 48(1). https://doi.org/10.5552/crojfe.2027.4524
Vancouver
Parsakhoo A, Hosseini SA. Modification of mechanical properties of silty soils by biopolymers for construction purposes. Croatian journal of forest engineering. 2027;48(1). doi:10.5552/crojfe.2027.4524
BibTeX
@article{Parsakhoo2027,
author = {Parsakhoo, Aidin and Hosseini, Seyed Ataollah},
title = {Modification of mechanical properties of silty soils by biopolymers for construction purposes},
journal = {Croatian journal of forest engineering},
year = {2027},
volume = {48},
number = {1},
doi = {10.5552/crojfe.2027.4524}
}
EUVIMED