Design of Finger Bending Measurement System
Journal of Applied Engineering & Technology (JAET) · 2018
DOI: 10.55447/jaet.02.02.12 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Applied Engineering & Technology (JAET), 2018. Verfasst von Rabiatull Ainn Binti Mohamed. Die Arbeit wurde bisher 1-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
Human finger is a flexible, long and thin extension of the hand commonly referred to as the digits. The fingers on the hands correspond to the toes of the feet. Humans have five fingers on each hand and a significant feature in humans is the opposable thumb. Apart from the flexibility of the human fingers which make it such a useful appendage of the hand, there is a high concentration of receptors in the finger which means it is an important sense organ. The boring training processes and a long therapy session that often cause patients to lose motivation to continue therapy may cause the patient to discontinue the rehabilitation process. A sensorized finger bending glove is a device that can be used to measure the level of rehabilitation process with respect to the finger movements using a glove that consists of a flex sensor, Liquid Crystal Display (LCD) and Light Emitting Diode (LED) for a fracture finger patient. The aim of this work is to develop a device that enhances the life of patient to fulfil their life activities such as lifting, gripping and grasping. This glove consists of five flex sensors that are placed on all fingers of glove. Then, these sensors will be used as an input to control the movement of fingers using Arduino Mega. Arduino acts as an interface between the flex sensors with an indicator which are LED and LCD. The glove is controlled based on the movement of flex sensor. The result shows that a sensorized glove can be controlled by patient‟s fingers when there is no bending (0°), red LED will light up. The blue and green LED will light up when patient can bend their fingers at 45° and 90° respectively.
Zitieren
APA
Mohamed, R. A. B. (2018). Design of Finger Bending Measurement System. Journal of Applied Engineering & Technology (JAET). https://doi.org/10.55447/jaet.02.02.12
Vancouver
Mohamed RAB. Design of Finger Bending Measurement System. Journal of Applied Engineering & Technology (JAET). 2018. doi:10.55447/jaet.02.02.12
BibTeX
@article{Mohamed2018,
author = {Mohamed, Rabiatull Ainn Binti},
title = {Design of Finger Bending Measurement System},
journal = {Journal of Applied Engineering & Technology (JAET)},
year = {2018},
doi = {10.55447/jaet.02.02.12}
}
EUVIMED