EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

CMOS Based SNR Measurement for Wireless Application

Mohd Khuzairi Bin Che Kamarudin

Journal of Applied Engineering & Technology (JAET) · 2018

DOI: 10.55447/jaet.02.01.7 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Engineering & Technology (JAET), 2018. Verfasst von Mohd Khuzairi Bin Che Kamarudin. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper presents the design of a CMOS based Signal to Noise Ratio (SNR) detection system. The design system is developed using divider, multiplier and an additional multiplier in a feedback loop. The divider in the designed system produce 1/V of the signal and multiplier produces the average squared SNR signal. The last stage in this design circuit is a low pass filter necessary to implement the desired “average” measure of the signal to noise ratio (SNR). From simulation, the output voltage of SNR is 9.167mVp-p and from practical, the output voltage is 13.2mVp-p.

Zitieren

APA

Kamarudin, M. K. B. C. (2018). CMOS Based SNR Measurement for Wireless Application. Journal of Applied Engineering & Technology (JAET). https://doi.org/10.55447/jaet.02.01.7

Vancouver

Kamarudin MKBC. CMOS Based SNR Measurement for Wireless Application. Journal of Applied Engineering & Technology (JAET). 2018. doi:10.55447/jaet.02.01.7

BibTeX
@article{Kamarudin2018,
  author = {Kamarudin, Mohd Khuzairi Bin Che},
  title = {CMOS Based SNR Measurement for Wireless Application},
  journal = {Journal of Applied Engineering & Technology (JAET)},
  year = {2018},
  doi = {10.55447/jaet.02.01.7}
}
Kostenlos starten →