EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Relation between Sub-grain Size and Dislocation Density During Steady-State Dislocation Creep of Polycrystalline Cubic Metals

Manabu Tamura

Journal of Materials Science Research · 26.07.2018 · 7 (4) · 26

DOI: 10.5539/jmsr.v7n4p26 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Materials Science Research, online erschienen am 26.07.2018. Verfasst von Manabu Tamura. Die Arbeit wurde bisher 3-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The sub-grain size, d, during steady-state dislocation creep of polycrystalline metals is theoretically formulated to be inversely proportional to the dislocation density, ρ, which is defined as the number of dislocations swept out of a sub-grain divided by the cross-sectional area of the sub-grain. This dislocation density differs from the typically observed dislocation density inside a sub-grain after unloading, ρ_ob. In the current work, the ρ_ob values inside sub-grains in steadily crept specimens of Al, Cu, Fe, Fe–Mo alloy, austenitic stainless steel, and high-Cr martensitic steel reported in the literature were used to evaluate the relation ρ_ob=ηρ. It was confirmed that η≈1 for pure metals (regardless of the type of metal) crept at high temperatures and low stresses or for long durations and η>1 for Mo-containing alloys and martensitic steel crept at low temperatures and/or high stresses. Moreover, it is suggested that the condition η>1 corresponds to a state of excess immobile dislocations inside the sub-grain. The theoretical relation d_ob (≈d)∝η∙〖ρ_ob〗^(-1), where d_ob is the observed sub-grain size, essentially differs from the well-known empirical relation d_ob∝〖ρ_ob〗^(-0.5).

Zitieren

APA

Tamura, M. (2018). Relation between Sub-grain Size and Dislocation Density During Steady-State Dislocation Creep of Polycrystalline Cubic Metals. Journal of Materials Science Research, 7(4), 26. https://doi.org/10.5539/jmsr.v7n4p26

Vancouver

Tamura M. Relation between Sub-grain Size and Dislocation Density During Steady-State Dislocation Creep of Polycrystalline Cubic Metals. Journal of Materials Science Research. 2018;7(4):26. doi:10.5539/jmsr.v7n4p26

BibTeX
@article{Tamura2018,
  author = {Tamura, Manabu},
  title = {Relation between Sub-grain Size and Dislocation Density During Steady-State Dislocation Creep of Polycrystalline Cubic Metals},
  journal = {Journal of Materials Science Research},
  year = {2018},
  volume = {7},
  number = {4},
  pages = {26},
  doi = {10.5539/jmsr.v7n4p26}
}
Kostenlos starten →