EUVIMEDEUVIMED entdecken
Crossref

Microstructure and hardness properties of Ni-Si3N4 composite materials produced by powder metallurgy method

Hasaneen HOUSSAİN, Serkan ISLAK, Uğur ÇALIGÜLÜ

Kastamonu University Journal of Engineering and Sciences · 2023

DOI: 10.55385/kastamonujes.1357436 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Kastamonu University Journal of Engineering and Sciences, 2023. Verfasst von Hasaneen HOUSSAİN und 2 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, the effect of the amount of Si3N4 on the microstructure and hardness properties of nickel (Ni) matrix silicon nitride (Si3N4) reinforced composite materials was investigated. Si3N4 was added to Ni at 5%, 10% and 15% by volume. The samples were produced using cold pressing and pressureless sintering technique. The sintering temperature was 1200 °C and the sintering time was 1 hour. SEM-EDS and XRD analyzes were used for the microstructure and phase formation analysis of the composites. The densities of the composites were measured according to the Archimedean principle. To determine the effect of Si3N4 on hardness properties, the microhardness of the samples was measured as Vicker. It was determined from XRD analysis that Ni, β1 (Ni3Si) and ε-Ni3Si2 phases were formed in the microstructure. As the amount of Si3N4 increased, both the experimental densities and relative densities decreased, and the amount of pores partially increased. Due to the distribution strengthening effect of Si3N4 in the Ni matrix, there was an increase in the hardness values and the highest hardness was determined as 135 HV2 with the addition of 15% Si3N4.

Zitieren

APA

HOUSSAİN, H., ISLAK, S., & ÇALIGÜLÜ, U. (2023). Microstructure and hardness properties of Ni-Si3N4 composite materials produced by powder metallurgy method. Kastamonu University Journal of Engineering and Sciences. https://doi.org/10.55385/kastamonujes.1357436

Vancouver

HOUSSAİN H, ISLAK S, ÇALIGÜLÜ U. Microstructure and hardness properties of Ni-Si3N4 composite materials produced by powder metallurgy method. Kastamonu University Journal of Engineering and Sciences. 2023. doi:10.55385/kastamonujes.1357436

BibTeX
@article{HOUSSAN2023,
  author = {HOUSSAİN, Hasaneen and ISLAK, Serkan and ÇALIGÜLÜ, Uğur},
  title = {Microstructure and hardness properties of Ni-Si3N4 composite materials produced by powder metallurgy method},
  journal = {Kastamonu University Journal of Engineering and Sciences},
  year = {2023},
  doi = {10.55385/kastamonujes.1357436}
}
Kostenlos starten →