EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

KARAKTERISASI GAYA TEKAN MAKSIMUM LIMBAH BOTOL PLASTIK SEBAGAI DASAR PERANCANGAN MESIN PRESS BOTOL PLASTIK

Sufiyanto

Jurnal Teknik Mesin dan Industri (JuTMI) · 11.08.2026 · 5 (2) · 17-27

DOI: 10.55331/jutmi.v5i2.106 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Jurnal Teknik Mesin dan Industri (JuTMI), online erschienen am 11.08.2026. Verfasst von Sufiyanto. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Plastic bottle waste occupies a large volume despite its relatively low weight, making compaction essential to improve storage and transportation efficiency before recycling. This study aimed to characterize the maximum compressive force of various types of plastic bottle waste as a basis for designing a plastic bottle press machine. Compression tests were conducted on five types of plastic bottle waste, namely 220 mL polypropylene (PP) drinking cups, 330 mL, 600 mL, and 1500 mL polyethylene terephthalate (PET) bottles, and high-density polyethylene (HDPE) lubricant bottles. Each specimen was tested ten times using a digital force gauge-based compression testing device under static axial loading. The data were analyzed using descriptive statistics, the Shapiro–Wilk normality test, Levene's homogeneity test, and one-way ANOVA. The average maximum compressive forces were 33.80 N, 59.78 N, 122.34 N, 253.18 N, and 638.64 N, respectively. The ANOVA results showed that the type of plastic bottle significantly affected the maximum compressive force (p < 0.05). Applying a safety factor of 1.5 yielded a design force of 957.96 N, which can serve as the basis for determining the capacity of a plastic bottle press machine.

Zitieren

APA

Sufiyanto (2026). KARAKTERISASI GAYA TEKAN MAKSIMUM LIMBAH BOTOL PLASTIK SEBAGAI DASAR PERANCANGAN MESIN PRESS BOTOL PLASTIK. Jurnal Teknik Mesin dan Industri (JuTMI), 5(2), 17-27. https://doi.org/10.55331/jutmi.v5i2.106

Vancouver

Sufiyanto. KARAKTERISASI GAYA TEKAN MAKSIMUM LIMBAH BOTOL PLASTIK SEBAGAI DASAR PERANCANGAN MESIN PRESS BOTOL PLASTIK. Jurnal Teknik Mesin dan Industri (JuTMI). 2026;5(2):17-27. doi:10.55331/jutmi.v5i2.106

BibTeX
@article{Sufiyanto2026,
  author = {Sufiyanto},
  title = {KARAKTERISASI GAYA TEKAN MAKSIMUM LIMBAH BOTOL PLASTIK SEBAGAI DASAR PERANCANGAN MESIN PRESS BOTOL PLASTIK},
  journal = {Jurnal Teknik Mesin dan Industri (JuTMI)},
  year = {2026},
  volume = {5},
  number = {2},
  pages = {17--27},
  doi = {10.55331/jutmi.v5i2.106}
}
Kostenlos starten →