EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

HARMONIZATION OF DESIGN PROCEDURES FOR CONCRETE PAVEMENTS AND INDUSTRIAL FLOOR SLABS IN THE CONTEXT OF EN 206, EC 2 AND NATIONAL REGULATIONS

Marjan Matić, Miloš Šešlija, Jovan Papić

Scientific Journal of Civil Engineering · 25.01.2026 · 14 (2) · 15

DOI: 10.55302/sjce2514215m ↗

Kurz gefasst

Fachartikel in der Zeitschrift Scientific Journal of Civil Engineering, online erschienen am 25.01.2026. Verfasst von Marjan Matić und 2 weiteren Autor:innen. Die Arbeit nennt 15 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Concrete pavement structures in Serbia and throughout the Western Balkans are still designed according to standards published more than 30 years ago, relying on material models derived from PBAB 87. Industrial floor slabs, although structurally almost identical to concrete pavements, are often designed according to foreign guidelines, using material properties determined in accordance with EN 206 and EC 2. Modern national regulation, including the Regulation on Technical Requirements for Concrete, SRPS EN 206:2021, SRPS U.M1.206:2023, and EC 2, requires a unified approach to defining concrete properties for all concrete structures. As a result, a significant discrepancy arises: structures exhibiting the same mechanical behavior are designed using different material models, with different values of tensile and flexural strength, modulus of elasticity, and compressive strength. This paper provides an overview of current design practice for concrete pavements and industrial floor slabs, with special emphasis on manipulation traffic slabs used on industrial platforms. Concrete properties according to PBAB 87/SRPS U.E3.020 are compared with those defined in EN 206/EC 2, accompanied by a discussion on how this choice affects structural design. Since the second generation of EC 2 does not cover slabs on ground, the need to harmonize national road engineering standards with EN 206 is emphasized, as well as the need for the third generation of Eurocodes to introduce specific provisions for concrete pavements and industrial slabs.

Zitieren

APA

Matić, M., Šešlija, M., & Papić, J. (2026). HARMONIZATION OF DESIGN PROCEDURES FOR CONCRETE PAVEMENTS AND INDUSTRIAL FLOOR SLABS IN THE CONTEXT OF EN 206, EC 2 AND NATIONAL REGULATIONS. Scientific Journal of Civil Engineering, 14(2), 15. https://doi.org/10.55302/sjce2514215m

Vancouver

Matić M, Šešlija M, Papić J. HARMONIZATION OF DESIGN PROCEDURES FOR CONCRETE PAVEMENTS AND INDUSTRIAL FLOOR SLABS IN THE CONTEXT OF EN 206, EC 2 AND NATIONAL REGULATIONS. Scientific Journal of Civil Engineering. 2026;14(2):15. doi:10.55302/sjce2514215m

BibTeX
@article{Mati2026,
  author = {Matić, Marjan and Šešlija, Miloš and Papić, Jovan},
  title = {HARMONIZATION OF DESIGN PROCEDURES FOR CONCRETE PAVEMENTS AND INDUSTRIAL FLOOR SLABS IN THE CONTEXT OF EN 206, EC 2 AND NATIONAL REGULATIONS},
  journal = {Scientific Journal of Civil Engineering},
  year = {2026},
  volume = {14},
  number = {2},
  pages = {15},
  doi = {10.55302/sjce2514215m}
}
Kostenlos starten →