EUVIMEDEUVIMED entdecken
Crossref

Low velocity impact response of CFRP and Al2024-T3 helicopter blade

Sakine Kurtar, Gamze Yaman, Dilara Nur Bektaş, Seda Nur Özsunar, Mesut Uyaner

International Journal of Aeronautics and Astronautics · 2024

DOI: 10.55212/ijaa.1583352 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Aeronautics and Astronautics, 2024. Verfasst von Sakine Kurtar und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 18 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A high level of safety is demanded in response to the foreign object damage (FOD) problem frequently encountered in aviation. For this reason, in this study, the effect of stone impact on a helicopter blade performed within the scope of FOD is investigated. Considering the actual size of the propeller, a stone impact is applied to a certain section and the mechanical behavior of the propeller is examined according to the material type. In this direction, the Bo-105 helicopter blade with the NACA-23012 profile is taken as a reference, and a 3D drawing of the blade is made in the SolidWorks program. The behavioral properties of metal and composite materials frequently preferred in aviation against stone impact are compared. For this purpose, Al2024-T3 and carbon fiber reinforced polymer (CFRP) are selected. These materials are frequently preferred in aviation. To observe the difference between the materials, low-velocity impact analysis is performed on two blade sections with span dimensions of 140 mm and chord dimensions of 310 mm under the same geometry and conditions. The analysis of the simulated action is obtained using the LS-DYNA program. Because it is a mechanical action, the Arbitrary Lagrangian (ALE) method was used accordingly. Within the scope of this method, the stone to be hit by the blade was modeled as a 5 mm solid structure and hit the blade surface with a speed of 3500 mm/s. While the blade with Al2024-T3 material was modeled as a shell, the CFRP blade was modeled as a composite part consisting of six layers at [0-90-0-90-0-90] degrees. Material properties were defined on the blade using 018 Law Plasticity and 54/55 Enhanced Composite Damage material cards for Al2024-T3 and CFRP, respectively. As a result of this analysis, the time-dependent changes in displacement, kinetic energy, and force parameters were acquired. Then, the low-velocity impact responses of the CFRP and the Al2024-T3 blades were compared.

Zitieren

APA

Kurtar, S., Yaman, G., Bektaş, D. N., Özsunar, S. N., & Uyaner, M. (2024). Low velocity impact response of CFRP and Al2024-T3 helicopter blade. International Journal of Aeronautics and Astronautics. https://doi.org/10.55212/ijaa.1583352

Vancouver

Kurtar S, Yaman G, Bektaş DN, Özsunar SN, Uyaner M. Low velocity impact response of CFRP and Al2024-T3 helicopter blade. International Journal of Aeronautics and Astronautics. 2024. doi:10.55212/ijaa.1583352

BibTeX
@article{Kurtar2024,
  author = {Kurtar, Sakine and Yaman, Gamze and Bektaş, Dilara Nur and Özsunar, Seda Nur and Uyaner, Mesut},
  title = {Low velocity impact response of CFRP and Al2024-T3 helicopter blade},
  journal = {International Journal of Aeronautics and Astronautics},
  year = {2024},
  doi = {10.55212/ijaa.1583352}
}
Kostenlos starten →