EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

IMPROVEMENT OF TRIBOLOGICAL PROPERTIES FOR LUBRICANTS BY ADDING GRAPHENE CONCENTRATE

Dr.Dar Alsaadi, Valery Ostrikov, Waad Khalaf

Al-Salam Journal for Engineering and Technology · 2022

DOI: 10.55145/ajest.2022.01.01.003 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Al-Salam Journal for Engineering and Technology, 2022. Verfasst von Dr.Dar Alsaadi und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This work is improving the performance properties of greases additives graphene concentrate. It has been established that the addition of 1% graphene concentrate to the lubricant Solidol J contributes to an increase in its anti-wear properties by more than 30 percent. With the enrichment of commercial grease Lithol-24 with graphene concentrate, a decrease in the diameter of the spot of wear of the balls was determined at the plate size from 0.36 mm to 0.30 mm. As a result of testing lubricants in rolling bearings, a decrease in the heating temperature of bearings operating on lubricants enriched with graphene concentrate was found in comparison with commercial lubricants.

Zitieren

APA

Alsaadi, D., Ostrikov, V., & Khalaf, W. (2022). IMPROVEMENT OF TRIBOLOGICAL PROPERTIES FOR LUBRICANTS BY ADDING GRAPHENE CONCENTRATE. Al-Salam Journal for Engineering and Technology. https://doi.org/10.55145/ajest.2022.01.01.003

Vancouver

Alsaadi D, Ostrikov V, Khalaf W. IMPROVEMENT OF TRIBOLOGICAL PROPERTIES FOR LUBRICANTS BY ADDING GRAPHENE CONCENTRATE. Al-Salam Journal for Engineering and Technology. 2022. doi:10.55145/ajest.2022.01.01.003

BibTeX
@article{Alsaadi2022,
  author = {Alsaadi, Dr.Dar and Ostrikov, Valery and Khalaf, Waad},
  title = {IMPROVEMENT OF TRIBOLOGICAL PROPERTIES FOR LUBRICANTS BY ADDING GRAPHENE CONCENTRATE},
  journal = {Al-Salam Journal for Engineering and Technology},
  year = {2022},
  doi = {10.55145/ajest.2022.01.01.003}
}
Kostenlos starten →