EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Synthesis and Antimicrobial Properties Pectin + CuNi Films and Characterization by Scanning Electron Microscopy

Yamila Illanez, Corina Cangiano, Yesica Sabrina Lambrese, Cecilia Fernandez, Marcelo Ricardo Esquivel, Maria de los Ángeles Cangiano

New Environmentally-Friendly Materials · 2025

DOI: 10.55121/nefm.v4i2.711 ↗

Kurz gefasst

Fachartikel in der Zeitschrift New Environmentally-Friendly Materials, 2025. Verfasst von Yamila Illanez und 5 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The synthesis of pectin-based films containing nanoparticles of CuNi (NPs), with potential antimicrobial properties, as an active solid is presented in this work. The NPs were dispersed in pure pectin to be used as food packaging in the food industry. The samples obtained were laid flat to characterize the sample thickness. The goal of this work is to find appropriate electron microscopy techniques to characterize the dispersion of the NPs on the pectin film and the pectin microstructural and antimicrobial characteristics properly. Different microstructural techniques of scanning electron microscopy modes were used to study the films, including low-voltage scanning electron microscopy (SEM) and low-voltage energy-dispersive spectroscopy (EDS). The condition of low beam voltage allows the sample characterization without destroying the sample surface/bulk due to electron irradiation. The pectin films containing raw NPs (pectin + NPs) and milled NPs (pectin + milled NPs) were observed by SEM in two different image modes: secondary electrons (SE) and backscattered electrons (BSE). The last mode allows the identification of sample components, i.e., matrix + samples containing different atomic Z numbers. This fact allows us to know the distribution of the metal particles within the volume of the sample. The results obtained in this work are relevant for the characterization and further use of these films in the protection of snacks in the food industry.

Zitieren

APA

Illanez, Y., Cangiano, C., Lambrese, Y. S., Fernandez, C., Esquivel, M. R., & Cangiano, M. D. L. Á. (2025). Synthesis and Antimicrobial Properties Pectin + CuNi Films and Characterization by Scanning Electron Microscopy. New Environmentally-Friendly Materials. https://doi.org/10.55121/nefm.v4i2.711

Vancouver

Illanez Y, Cangiano C, Lambrese YS, Fernandez C, Esquivel MR, Cangiano MDLÁ. Synthesis and Antimicrobial Properties Pectin + CuNi Films and Characterization by Scanning Electron Microscopy. New Environmentally-Friendly Materials. 2025. doi:10.55121/nefm.v4i2.711

BibTeX
@article{Illanez2025,
  author = {Illanez, Yamila and Cangiano, Corina and Lambrese, Yesica Sabrina and Fernandez, Cecilia and Esquivel, Marcelo Ricardo and Cangiano, Maria de los Ángeles},
  title = {Synthesis and Antimicrobial Properties Pectin + CuNi Films and Characterization by Scanning Electron Microscopy},
  journal = {New Environmentally-Friendly Materials},
  year = {2025},
  doi = {10.55121/nefm.v4i2.711}
}
Kostenlos starten →