A hybrid bionic strategy to enhance the static characteristics of roller-cone bit bearings using CFD simulations
SOCAR Proceedings · 2026 · (2) · 27-36
DOI: 10.5510/ogp20260201192 ↗Kurz gefasst
Fachartikel in der Zeitschrift SOCAR Proceedings, 2026. Verfasst von K. A. Bashmur und 2 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref).
Abstract (Originalsprache)
The service life of roller-cone drill bits is largely determined by the condition of their bearing units, which account for a significant share of drilling failures. Reducing friction and increasing load-carrying capacity in bearing assemblies are essential for improving rock-breaking efficiency and extending tool life. One promising approach is the use of a bionic surface texture, which stabilizes the lubricant film and redistributes pressure within the contact zone. In this work, a combined bionic surface texturing strategy is proposed for the thrust bearing of a roller-cone bit, integrating a phyllotactic-inspired distribution pattern with ellipsoidal micro-dimples in both symmetric and asymmetric configurations. A CFD model of the thrust bearing was developed using numerical simulations in ANSYS Fluent. Smooth and textured surfaces were compared. Analysis of pressure distribution and shear stress demonstrated that the combined texture increases the load-carrying capacity of the lubricant film by up to 9% and the phyllotactic pattern reduces the friction coefficient by more than two times compared to a smooth surface. Additionally, a comparison between the phyllotactic pattern and a linear arrangement of micro-dimples showed a 14% reduction in friction coefficient with a slight decrease in load-carrying capacity. The obtained results confirm the effectiveness of the bionic approach in the design of roller-cone bit bearings and can be applied to develop wear-resistant and energy-efficient structures that contribute to increasing the maintenance interval of drilling tools. Keywords: roller-cone bit; bearing; bionic surface texturing; phyllotactic; ellipsoidal dimples; CFD.
Zitieren
APA
Bashmur, K. A., Zagulyaev, A. V., & Nebylitsyn, M. V. (2026). A hybrid bionic strategy to enhance the static characteristics of roller-cone bit bearings using CFD simulations. SOCAR Proceedings, 27-36. https://doi.org/10.5510/ogp20260201192
Vancouver
Bashmur KA, Zagulyaev AV, Nebylitsyn MV. A hybrid bionic strategy to enhance the static characteristics of roller-cone bit bearings using CFD simulations. SOCAR Proceedings. 2026:27-36. doi:10.5510/ogp20260201192
BibTeX
@article{Bashmur2026,
author = {Bashmur, K. A. and Zagulyaev, A. V. and Nebylitsyn, M. V.},
title = {A hybrid bionic strategy to enhance the static characteristics of roller-cone bit bearings using CFD simulations},
journal = {SOCAR Proceedings},
year = {2026},
number = {2},
pages = {27--36},
doi = {10.5510/ogp20260201192}
}
EUVIMED