Influence of metallurgical defects on cracking of oil and gas pipelines
SOCAR Proceedings · 2026 · (1) · 109-115
DOI: 10.5510/ogp20260101158 ↗Kurz gefasst
Fachartikel in der Zeitschrift SOCAR Proceedings, 2026. Verfasst von A. T. Mammadov und 2 weiteren Autor:innen.
Abstract (Originalsprache)
This article examines metallurgical defects responsible for uncontrolled and sudden failures of oil and gas pipelines. It is shown that fracture initiation originates from crack nucleation sites retained in the pipe steel microstructure due to deviations from proper metallurgical processing regimes. To verify this assumption, detailed macro - and microstructural analyses of pipe steel were conducted. The results reveal pronounced structural banding, characteristic distributions of sulfide inclusions, and delamination paths associated with crack development within the pipe wall. Within the banded structure oxide inclusions were also identified. Fractographic examination of defective pipe sections using scanning electron microscopy demonstrated that fracture preferentially occurs in regions with high concentrations of non-metallic inclusions. Fracture surface morphology was analyzed in specimens subjected to transverse and vertical impact loading. It was discovered that brittle cracks in vertically loaded specimens form in regions of the base metal lacking plastic deformation and are primarily associated with accumulations of sulfides and oxides. Microcracks within sulfide inclusions act as initiation sites for slip band formation and, under increasing stress, promote ductile crack propagation, while their coalescence along elongated sulfide inclusions accelerates crack growth. Mechanical properties measured in longitudinal and transverse directions coincided with a probability of 0.95. A strong correlation (0.94) was identified between the stress intensity factor (K₁c) and banding length. Fracture toughness tests indicate that steel failure may occur at stress levels below the yield strength in the presence of microscopic pores and non-metallic inclusions. Keywords: pipelines; oil and gas industry; steel microstructure; non-metallic inclusions; sulfide compounds; banding; crack formation.
Zitieren
APA
Mammadov, A. T., Ismailov, N. S., & Babayev, A. I. (2026). Influence of metallurgical defects on cracking of oil and gas pipelines. SOCAR Proceedings, 109-115. https://doi.org/10.5510/ogp20260101158
Vancouver
Mammadov AT, Ismailov NS, Babayev AI. Influence of metallurgical defects on cracking of oil and gas pipelines. SOCAR Proceedings. 2026:109-115. doi:10.5510/ogp20260101158
BibTeX
@article{Mammadov2026,
author = {Mammadov, A. T. and Ismailov, N. Sh. and Babayev, A. I.},
title = {Influence of metallurgical defects on cracking of oil and gas pipelines},
journal = {SOCAR Proceedings},
year = {2026},
number = {1},
pages = {109--115},
doi = {10.5510/ogp20260101158}
}
EUVIMED