EUVIMEDEUVIMED entdecken
Crossref

Methodology for determining the optimal concentration of an alkali solution for enhanced oil recovery

A. S. Hadiyeva, Y. N. Mamalov, K. T. Bissembayeva, G. S. Sabyrbayeva

SOCAR Proceedings · 2026 · (1) · 65-69

DOI: 10.5510/ogp20260101153 ↗

Kurz gefasst

Fachartikel in der Zeitschrift SOCAR Proceedings, 2026. Verfasst von A. S. Hadiyeva und 3 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

At present, most oil-producing countries are developing fields with hard-to-recover oil reserves. To achieve high technological and especially economic indicators, it is necessary to apply methods that influence oil-bearing formations. Enhanced Oil Recovery (EOR) methods are among the most relevant tasks of modern oil production, since they make it possible to increase the oil displacement coefficient in individual zones that were previously unaffected, as well as in the reservoir as a whole. In addition, they help improve the main parameters of oil mobility within the formation. Most physico-chemical methods for increasing oil recovery are based on the properties of oil droplet detachment from the pore surface. These properties include wettability, adhesion, interfacial tension, and capillary pressure. For this purpose, a methodological approach is required to determine an effective chemical agent. This involves conducting laboratory studies of the physicochemical properties of the proposed agent (in our case, an alkaline solution) and, based on these results, determining its optimal concentration. Laboratory studies of the properties of the agent and oil were carried out using the following instruments: a Contact Angle Meter SDC-100, the «Spinning Drop» method (rotating drop), and a stalagmometer for calculating capillary pressure. To verify the reliability of the obtained results, they were tested on a reservoir model. For this purpose, experimental studies of oil displacement from the formation using an alkaline solution with optimal concentration were carried out. The obtained results showed good efficiency of this technology. Moreover, the higher the concentration, the higher the oil displacement coefficient. Keywords: oil; alkali; contact angle; adhesion; concentration; oil displacement factor.

Zitieren

APA

Hadiyeva, A. S., Mamalov, Y. N., Bissembayeva, K. T., & Sabyrbayeva, G. S. (2026). Methodology for determining the optimal concentration of an alkali solution for enhanced oil recovery. SOCAR Proceedings, 65-69. https://doi.org/10.5510/ogp20260101153

Vancouver

Hadiyeva AS, Mamalov YN, Bissembayeva KT, Sabyrbayeva GS. Methodology for determining the optimal concentration of an alkali solution for enhanced oil recovery. SOCAR Proceedings. 2026:65-69. doi:10.5510/ogp20260101153

BibTeX
@article{Hadiyeva2026,
  author = {Hadiyeva, A. S. and Mamalov, Y. N. and Bissembayeva, K. T. and Sabyrbayeva, G. S.},
  title = {Methodology for determining the optimal concentration of an alkali solution for enhanced oil recovery},
  journal = {SOCAR Proceedings},
  year = {2026},
  number = {1},
  pages = {65--69},
  doi = {10.5510/ogp20260101153}
}
Kostenlos starten →