EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-SA 4.0

Effect of Hair Particle Filler on the Characteristics of Green Composite Based on Bacterial Cellulose

Umi Lailatul Jamilah, Endhah Purwandari, Sujito Sujito

Journal of Fibers and Polymer Composites · 29.03.2026 · 5 (1) · 101-113

DOI: 10.55043/jfpc.v5i1.563 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Fibers and Polymer Composites, online erschienen am 29.03.2026. Verfasst von Umi Lailatul Jamilah und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The growing demand for sustainable materials and effective waste management has encouraged the development of environmentally friendly composites. Green composites are a promising alternative to conventional materials for environmental preservation. In this study, bacterial cellulose derived from nata de coco was used as a matrix, while haircut waste particles served as a filler. Composites were fabricated via compression molding at 170 °C with filler contents of 0, 15, 25, 35, and 45 wt.%. The synthesized materials were characterized through tensile testing, scanning electron microscopy (SEM), and Fourier transform infrared (FTIR) spectroscopy. Increasing hair-particle content increased the elastic modulus from 44.11 ± 3.02 MPa (A1) to 130.46 ± 4.94 MPa (A2), indicating enhanced stiffness of the composite; however, further increases in filler content slightly reduced the modulus due to possible void formation and weaker interfacial adhesion. In contrast, the tensile strength decreased progressively from 11.54 ± 0.56 MPa (A1) to 5.16 ± 0.52 MPa (A5) with increasing filler content. SEM observations revealed the formation of voids and weaker matrix–filler interactions at higher filler contents, which contributed to the reduction in tensile strength. FTIR spectra showed the presence of O–H, C–H, and C=O functional groups, suggesting possible interactions between bacterial cellulose and hair particles. Overall, a filler content of 15 wt.% provides the best balance between stiffness and structural integrity, demonstrating the potential of hair waste as a sustainable reinforcement in bacterial cellulose-based green composites.

Zitieren

APA

Jamilah, U. L., Purwandari, E., & Sujito, S. (2026). Effect of Hair Particle Filler on the Characteristics of Green Composite Based on Bacterial Cellulose. Journal of Fibers and Polymer Composites, 5(1), 101-113. https://doi.org/10.55043/jfpc.v5i1.563

Vancouver

Jamilah UL, Purwandari E, Sujito S. Effect of Hair Particle Filler on the Characteristics of Green Composite Based on Bacterial Cellulose. Journal of Fibers and Polymer Composites. 2026;5(1):101-113. doi:10.55043/jfpc.v5i1.563

BibTeX
@article{Jamilah2026,
  author = {Jamilah, Umi Lailatul and Purwandari, Endhah and Sujito, Sujito},
  title = {Effect of Hair Particle Filler on the Characteristics of Green Composite Based on Bacterial Cellulose},
  journal = {Journal of Fibers and Polymer Composites},
  year = {2026},
  volume = {5},
  number = {1},
  pages = {101--113},
  doi = {10.55043/jfpc.v5i1.563}
}
Kostenlos starten →