EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-SA 4.0

Influence of Pumice Particles on the Mechanical and Morphology Properties of Polyester-Cornhusk Fiber Composites

Nasmi Herlina Sari, Suteja Suteja, I Putu Lokantara, Topan Gusti Wibowo

Journal of Fibers and Polymer Composites · 2022

DOI: 10.55043/jfpc.v1i2.54 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Fibers and Polymer Composites, 2022. Verfasst von Nasmi Herlina Sari und 3 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY-NC-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The purpose of this study was to look into the performance of a cornhusk fiber (CHF) reinforced polyester composite with pumice powder (PP) as a filler. The influence of varied PP volume fractions on composite tensile, bending, impact, and fracture morphology was studied. Using the hot press process, polyester-CHF composites with varied volume fractions of PP filler, namely 5%, 10%, 15%, 20%, 25%, and 30% wt, were created. The results showed that increasing the PP volume fraction from 5% to 15% enhanced the tensile strength of the polyester-CHF composite. The modulus of elasticity and bending modulus tend to grow when filler Pp decreases from 5% to 30%, but elongation value decreases. Furthermore, the best bending strength and impact toughness of the polyester-CHF composite were produced at a volume fraction of PP filler of 20%. SEM images indicate the presence of CHF pull out in all composite variations as well as the number of voids dependent on the PP filler volume.

Zitieren

APA

Sari, N. H., Suteja, S., Lokantara, I. P., & Wibowo, T. G. (2022). Influence of Pumice Particles on the Mechanical and Morphology Properties of Polyester-Cornhusk Fiber Composites. Journal of Fibers and Polymer Composites. https://doi.org/10.55043/jfpc.v1i2.54

Vancouver

Sari NH, Suteja S, Lokantara IP, Wibowo TG. Influence of Pumice Particles on the Mechanical and Morphology Properties of Polyester-Cornhusk Fiber Composites. Journal of Fibers and Polymer Composites. 2022. doi:10.55043/jfpc.v1i2.54

BibTeX
@article{Sari2022,
  author = {Sari, Nasmi Herlina and Suteja, Suteja and Lokantara, I Putu and Wibowo, Topan Gusti},
  title = {Influence of Pumice Particles on the Mechanical and Morphology Properties of Polyester-Cornhusk Fiber Composites},
  journal = {Journal of Fibers and Polymer Composites},
  year = {2022},
  doi = {10.55043/jfpc.v1i2.54}
}
Kostenlos starten →