EUVIMEDEUVIMED entdecken
Crossref

PERFORMANCE ANALYSIS OF SYMMETRICAL CMOS OTA WITH BULK DRIVEN CIRCUIT FOR ECG APPLICATIONS

V.V.K.D.V Prasad, Rohith Bala Jaswanth B, Sri Priya Aalla Uha, Bandi Yaswanth Reddy, Bhuvana Kruti Thota, Sneha Chinnam

International Scientific Journal of Engineering and Management · 11.04.2026 · 05 (04) · 1-5

DOI: 10.55041/isjem06278 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Scientific Journal of Engineering and Management, online erschienen am 11.04.2026. Verfasst von V.V.K.D.V Prasad und 5 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

- There's been a lot for biomedical circuits that don't use much power but still perform well, particularly in things like ECG monitoring. This project looks at designing and checking out a CMOS-based operational transconductance amplifier, or OTA, that is made to handle biomedical signals. ECG signals are weak signals and has low frequency, from about 0.05 Hz to 150 Hz, but the amplifier needs high gain, low power, and good common-mode rejection capacity [1]. After going through some study of this project, we picked a symmetrical OTA setup and built it with bulk-driven technology in CMOS. That bulk-driven helps with low-voltage and work better with input, which is suitable for portable ECG devices which run on batteries [2]. I implemented and simulated the whole in Cadence Virtuoso using a standard CMOS. It seems suitable for more generic CMOS process. After simulating, we checked parameters like differential gain, common-mode gain, frequency and phase responses, power, and stability with AC analysis. The differential gain came pretty high, and the common mode one was very low, so the CMRR improved a bit good. I tested it with different supply voltages and bias currents to see if we can use these for biomedical purposes. Power consumption is very low. Sometimes it's hard to get all these rights. The results show this OTA can amplify those ECG signals without issues, and it keeps power down. I think it's a great option and more suitable for integrating into small, low-power and wearable ECG monitoring systems. Key Words: Operational Transconductance Amplifier (OTA), Bulk driven circuit.

Zitieren

APA

Prasad, V., B, R. B. J., Uha, S. P. A., Reddy, B. Y., Thota, B. K., & Chinnam, S. (2026). PERFORMANCE ANALYSIS OF SYMMETRICAL CMOS OTA WITH BULK DRIVEN CIRCUIT FOR ECG APPLICATIONS. International Scientific Journal of Engineering and Management, 05(04), 1-5. https://doi.org/10.55041/isjem06278

Vancouver

Prasad V, B RBJ, Uha SPA, Reddy BY, Thota BK, Chinnam S. PERFORMANCE ANALYSIS OF SYMMETRICAL CMOS OTA WITH BULK DRIVEN CIRCUIT FOR ECG APPLICATIONS. International Scientific Journal of Engineering and Management. 2026;05(04):1-5. doi:10.55041/isjem06278

BibTeX
@article{Prasad2026,
  author = {Prasad, V.V.K.D.V and B, Rohith Bala Jaswanth and Uha, Sri Priya Aalla and Reddy, Bandi Yaswanth and Thota, Bhuvana Kruti and Chinnam, Sneha},
  title = {PERFORMANCE ANALYSIS OF SYMMETRICAL CMOS OTA WITH BULK DRIVEN CIRCUIT FOR ECG APPLICATIONS},
  journal = {International Scientific Journal of Engineering and Management},
  year = {2026},
  volume = {05},
  number = {04},
  pages = {1--5},
  doi = {10.55041/isjem06278}
}
Kostenlos starten →