EUVIMEDEUVIMED entdecken
Crossref

Performance Analysis of Four-Stroke Multi-Cylinder Petrol Engine Using Alternate Fuels

G .Iyppane, Dr.S. Maniraja, A. Anandharajb, T. Dharsanc, M.K .Gokuld

INTERNATIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT · 22.04.2026 · 10 (04) · 1-9

DOI: 10.55041/ijsrem61008 ↗

Kurz gefasst

Fachartikel in der Zeitschrift INTERNATIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT, online erschienen am 22.04.2026. Verfasst von G .Iyppane und 4 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The progressive exhaustion of conventional fossil-fuel reserves, combined with increasingly stringent emission legislation under Euro 6 and Bharat Stage VI (BS-VI) norms, has created an urgent imperative to develop and validate alternative fuel pathways for spark-ignition (SI) engines. This paper presents a rigorous experimental investigation of the performance and emission characteristics of a four-stroke, four-cylinder water-cooled petrol engine fuelled with four configurations: neat gasoline (baseline), 10% ethanol–gasoline blend (E10), 20% ethanol–gasoline blend (E20), and a compressed natural gas (CNG) pilot blend. Dynamometer tests were conducted at 1500 rpm across four discrete load conditions (25%, 50%, 75%, and 100% of rated load). Measured performance parameters include Brake Thermal Efficiency (BTE), Brake Specific Fuel Consumption (BSFC), Mechanical Efficiency, and Volumetric Efficiency. Exhaust emission constituents—HC, CO, CO₂, and NOₓ—were quantified using a calibrated five-gas analyser in accordance with ISO 8178. The Morse test was used to determine Indicated Power independently for each cylinder. Results demonstrate that E20 achieves the highest BTE of 33.2% at full load, a 10.3% relative improvement over the petrol baseline (30.1%), with BSFC concurrently reduced from 275 g/kWh to 245 g/kWh. HC emissions decrease by 27.6% and CO by 31.6% with E20, while NOₓ rises marginally by 7.2%. CNG blend delivers the lowest CO (1.68% vol) and NOₓ (810 ppm) but at a volumetric efficiency penalty. Uncertainty analysis confirms BTE values within ±1.32% at 95% confidence. E20 is substantiated as a viable drop-in alternative fuel requiring no hardware modification, aligned with India's EBP 2025 mandate. Index Terms alternate fuels, brake thermal efficiency, BSFC, CNG, ethanol blends, exhaust emissions, four-cylinder engine, SI engine.

Zitieren

APA

.Iyppane, G., Maniraja, D., Anandharajb, A., Dharsanc, T., & .Gokuld, M. (2026). Performance Analysis of Four-Stroke Multi-Cylinder Petrol Engine Using Alternate Fuels. INTERNATIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT, 10(04), 1-9. https://doi.org/10.55041/ijsrem61008

Vancouver

.Iyppane G, Maniraja D, Anandharajb A, Dharsanc T, .Gokuld M. Performance Analysis of Four-Stroke Multi-Cylinder Petrol Engine Using Alternate Fuels. INTERNATIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT. 2026;10(04):1-9. doi:10.55041/ijsrem61008

BibTeX
@article{Iyppane2026,
  author = {.Iyppane, G and Maniraja, Dr.S. and Anandharajb, A. and Dharsanc, T. and .Gokuld, M.K},
  title = {Performance Analysis of Four-Stroke Multi-Cylinder Petrol Engine Using Alternate Fuels},
  journal = {INTERNATIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT},
  year = {2026},
  volume = {10},
  number = {04},
  pages = {1--9},
  doi = {10.55041/ijsrem61008}
}
Kostenlos starten →