IoT-Based Smart Transformer Monitoring and Protection System with Theft Detection and Cloud Analytics
INTERNATIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT · 13.04.2026 · 10 (04) · 1-9
DOI: 10.55041/ijsrem60053 ↗Kurz gefasst
Fachartikel in der Zeitschrift INTERNATIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT, online erschienen am 13.04.2026. Verfasst von Challgolla Sridhar und 4 weiteren Autor:innen.
Abstract (Originalsprache)
— The power distribution transformers are one of the most crucial pieces of equipment used in electricity grids across the world. Failure of such devices due to any reasons ranging from electrical issues to thermal problems or even to theft may cause outages for many consumers, and result in losses. Transformer theft is still rampant in India and other developing countries, thus highlighting the need for remote monitoring systems. This paper describes the development of a robust and cost-effective IoT-based solution for the purpose of real-time monitoring and protection of power distribution transformers. The proposed system employs an Arduino Uno as the controlling device, along with various types of sensors, including ACS712 Current Sensor, Voltage Divider, DS18B20 Temperature sensor, HC-SR04 Ultrasonic Sensor for estimation of oil level, and ADXL345 Accelerometer for detecting physical tampering of the transformer. A SIM800A module is used to send SMSs to maintenance personnel about potential threats to the transformer's operation, whereas the NodeMCU (ESP8266) module sends sensor readings online to the ThingSpeak IoT cloud platform. Six parameters are continuously monitored by the system, namely: supply voltage, load current, transformer oil temperature, oil level, vibration/acceleration, and thermal status. In case of occurrence of any of these faults, threshold-based fault detection enables the system to automatically shut off the transformer via relay switching along with an alarm signal through the buzzer. The experimental findings revealed that the system was able to detect the occurrence of all faults including high voltage, low voltage, overload, high temperature, low oil level, and theft. Visualization of data was done on ThingSpeak dashboard throughout the experimentation period (March 25-April 04, 2026). Key Words— Transformer monitoring, IoT, Arduino, NodeMCU, ThingSpeak, ADXL345, ACS712, DS18B20, GSM, Theft detection, Condition monitoring
Zitieren
APA
Sridhar, C., Rushi, R. M., Kumar, B. S., Subhani, B. M., & Sandhya, K. (2026). IoT-Based Smart Transformer Monitoring and Protection System with Theft Detection and Cloud Analytics. INTERNATIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT, 10(04), 1-9. https://doi.org/10.55041/ijsrem60053
Vancouver
Sridhar C, Rushi RM, Kumar BS, Subhani BM, Sandhya K. IoT-Based Smart Transformer Monitoring and Protection System with Theft Detection and Cloud Analytics. INTERNATIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT. 2026;10(04):1-9. doi:10.55041/ijsrem60053
BibTeX
@article{Sridhar2026,
author = {Sridhar, Challgolla and Rushi, Rachabathuni Mohan and Kumar, Badakala Sai and Subhani, Beig Mehaboob and Sandhya, Kukatlapalli},
title = {IoT-Based Smart Transformer Monitoring and Protection System with Theft Detection and Cloud Analytics},
journal = {INTERNATIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT},
year = {2026},
volume = {10},
number = {04},
pages = {1--9},
doi = {10.55041/ijsrem60053}
}
EUVIMED