High-Speed Multiply–Accumulate Unit Based on Brent–Kung Adder with Pipelining
INTERNATIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT · 07.04.2026 · 10 (04) · 1-9
DOI: 10.55041/ijsrem59312 ↗Kurz gefasst
Fachartikel in der Zeitschrift INTERNATIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT, online erschienen am 07.04.2026. Verfasst von P. Vamsi und 5 weiteren Autor:innen.
Abstract (Originalsprache)
-The Multiply-Accumulate (MAC) Unit is a crucial component in all DSP Applications, due to its ability to perform high speed arithmetic operations. This Project aims to design and implement an 8-bit MAC Unit capable of performing multiplication and accumulation operations. The MAC Unit employs the same multiplier unit implemented using different adder architectures while keeping the multiplier constant. Conventional MAC units use Ripple Carry Adders (RCA) and Carry Look-Ahead Adders (CLA), which suffer from high carry propagation delay and increased hardware complexity respectively. To overcome these limitations, parallel prefix adders are proposed, such as Kogge–Stone (KSA), Ladner– Fischer (LFA), Brent Kung Adder with Pipelining are integrated into the MAC unit. The structures were formed using Verilog Hardware Description Language (HDL) and implemented on Xilinx ISE, with simulation carried out using Model Sim. Key Words: MAC Unit, 8-bit, RCA, CLA, Kogge-Stone Adder (KSA), Ladner-Fischer Adder (LFA), Verilog HDL, FPGA, DSP, Parallel Prefix Adder, Vivado, Artix7
Zitieren
APA
Vamsi, P., Pavitra, M. M., Sailaja, K. V., Keerthana, P., Vardhan, M. H., & Reddy, G. S. (2026). High-Speed Multiply–Accumulate Unit Based on Brent–Kung Adder with Pipelining. INTERNATIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT, 10(04), 1-9. https://doi.org/10.55041/ijsrem59312
Vancouver
Vamsi P, Pavitra MM, Sailaja KV, Keerthana P, Vardhan MH, Reddy GS. High-Speed Multiply–Accumulate Unit Based on Brent–Kung Adder with Pipelining. INTERNATIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT. 2026;10(04):1-9. doi:10.55041/ijsrem59312
BibTeX
@article{Vamsi2026,
author = {Vamsi, P. and Pavitra, Ms. M. and Sailaja, K. V. and Keerthana, P. and Vardhan, M. Harsha and Reddy, G. Sudheer},
title = {High-Speed Multiply–Accumulate Unit Based on Brent–Kung Adder with Pipelining},
journal = {INTERNATIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT},
year = {2026},
volume = {10},
number = {04},
pages = {1--9},
doi = {10.55041/ijsrem59312}
}
EUVIMED